Hobart HBR300 instruction manual Introduction, FCC Note, Verify Correctness of Weight

Page 5

Bench Receiving Scale

Hobart Bench Receiving Scale (HBR300)

Introduction

FCC Note

SAVE THESE INSTRUCTIONS

The HBR300 Bench Receiving Scale features a digital display with a 6-button keypad which tilts to create the best viewing angle. The scale also has adjustable legs and a level indicator to insure proper weight balance is maintained.

You can operate the scale in four modes using the 6-button keypad on the display.

1.One-Touch Tare

2.Batch Weighing

3.Preset Tare

4.Upper and Lower Weight Limit

This is a digital display scale with a 20Ó x 16Ó stainless steel platter which holds a capacity of 300 lb. x 0.1 lb. / 150 kg x 0.05 kg.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at his own expense.

Verify Correctness of Weight

When calibrated and sealed by your local Weights and Measures official, this scale is Legal for Trade. The NTEP (National Type Evaluation Program) certificate of Conformance number is 99-003.

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HBR300 Bench Receiving Scale Page Table of Contents Page FCC Note Verify Correctness of WeightIntroduction Look At This TipDonõt Using the ScaleSupplying Power to the Scale Leveling the Scale Adjusting the Display Head for Easy ViewingDisplay Head Indicator Illuminated Arrow IndicatesDisplay OverKeypad Operator ModeKey Function Setup ModeOperating the Scale Operating in Setup ModePresetting Tare Press Weight Limits Clearing a Preset TareSetting Upper and Lower Press Clearing Upper and Lower Upper and Lower Weight Operating in Operator ModeWeighing a Product When Limits Are SetWeighing in Batches Cleaning and Maintaining the ScaleCleaning Don’t SanitizingMaintaining Error Message Possible Cause Action Error MessagesAccessory Mobile Cart Page 34220 Rev. a 2/99
Top Page Image Contents