Hobart HBR300 instruction manual Press

Page 16

Bench Receiving Scale

2.PRESS

--OR--

PRESS

lb kg

NET

GROSS

TARE

to increase flashing digit by one.

to decrease the flashing digit by one.

3.PRESS to move left one digit. The digit to the left flashes and you can increase or decrease the digit value.

4.Repeat step 3 until your limit value is set.

5. PRESS	FUNCTION
	. You are now in the upper limit setting

mode. The Over indicator and the last digit on the display flashes.

☛

Note

If you want to set the lower limit only, PRESS	FUNCTION
If you want to set the lower limit only, PRESS	again
now to access Operator Mode.

6. Set your upper limit. Repeat steps 2 thru 4.

7.	FUNCTION	to return to Operator Mode.
	PRESS
EXAMPLE:		Lower Limit = 18.4
		Upper Limit = 20.0
1.	FUNCTION	.
	PRESS

ZERO

TARE

Over

Accept

Under

kg	lb	Net	Gross	III
		Wt.	Wt.	III
		Wt.	Wt.

LEGAL FOR TRADE

2. PRESS

lb kg 4 times.

ZERO

TARE

Over

Accept

Under

kg	lb	Net	Gross	III
		Wt.	Wt.	III
		Wt.	Wt.

LEGAL FOR TRADE

		TARE	NET
			GROSS
	3. PRESS	1 time, then PRESS
			2 times.

ZERO

TARE

Over

Accept

Under

kg	lb	Net	Gross	III
		Wt.	Wt.	III
		Wt.	Wt.

LEGAL FOR TRADE

12

Image 16

Contents HBR300 Bench Receiving Scale Page Table of Contents Page Introduction Verify Correctness of WeightFCC Note Tip Look At ThisUsing the Scale DonõtSupplying Power to the Scale Adjusting the Display Head for Easy Viewing Leveling the ScaleIndicator Illuminated Arrow Indicates Display HeadDisplay OverOperator Mode KeypadSetup Mode Key FunctionPresetting Tare Operating in Setup ModeOperating the Scale Press Setting Upper and Lower Clearing a Preset TareWeight Limits Press Clearing Upper and Lower Operating in Operator Mode Upper and Lower WeightWeighing a Product When Limits Are SetCleaning Cleaning and Maintaining the ScaleWeighing in Batches Maintaining SanitizingDon’t Error Messages Error Message Possible Cause ActionAccessory Mobile Cart Page 34220 Rev. a 2/99