Operating in Operator Mode, Weighing a Product When

Bench Receiving Scale

Operating in Operator Mode

Weighing a Product Using One-Touch Tare

Weighing a Product When Preset Tare is Set

Access Operator Mode to operate one-touch tare, weigh products, and weigh items in batches.

If you do not know the package weight (tare value), use one-touch tare.

To operate one-touch tare:

1.Place the container on the platter. The weight of the container displays.

TARE

2.PRESS . The display changes to 0.0 and the tare indicator is lit.

3.Place the product in the container on the platter. The display will indicate the net weight.

4.Remove the container and the product from the platter. The negative weight of the container (tare) displays.

TARE

5.PRESS . The weight display changes to 0.0, and the tare indicator no longer illuminates.

When weighing the product in Preset Tare Mode, the weight of the product (net weight) displays.

Once the tare is preset:

1.Place the container on the platter. 0.0 displays.

2.Place the product on the platter. The net weight displays.

Weighing a Product When	When weighing a product in Upper and Lower Weight
Upper and Lower Weight	Limit Mode, the Over or Under indicator illuminates if the
Limits Are Set	product weight is over or under your set weight limits. The
	Accept indicator illuminates if the weight is within the set

	weight limits.

Once the weight limits are set:

1.Place the product on the platter. The weight of the product displays, and the Over, Under, or Accept indicator illuminates.

2.If the Over indicator illuminates, remove some of your product until the Accept indicator illuminates.

3.If the Under indicator illuminates, add some of your product until the Accept indicator illuminates.