| Bench Receiving Scale |
Table of Contents |
|
INTRODUCTION | 1 |
FCC Note | 1 |
Verify Correctness of Weight | 1 |
Installation and Setup by An Authorized Hobart Technician | 2 |
Manual Overview | 2 |
USING THE SCALE | 3 |
Supplying Power to the Scale | 4 |
Leveling the Scale | 5 |
Adjusting the Display Head for Easy Viewing | 5 |
DISPLAY HEAD | 6 |
Display | 6 |
Keypad | 7 |
Operator Mode | 7 |
Setup Mode | 8 |
OPERATING THE SCALE | 9 |
Operating in Setup Mode | 9 |
Presetting Tare | 9 |
Clearing a Preset Tare | 11 |
Setting Upper and Lower Weight Limits | 11 |
Clearing Upper and Lower Weight Limits | 13 |
Operating in Operator Mode | 14 |
Weighing a Product Using | 14 |
Weighing a Product When Preset Tare Is Set | 14 |
Weighing a Product When Upper and Lower Weight Limits Are Set | 14 |
Weighing in Batches | 15 |
CLEANING AND MAINTAINING THE SCALE | 15 |
Cleaning | 15 |
Sanitizing | 16 |
Maintaining | 16 |
ERROR MESSAGES | 17 |
ACCESSORY (Mobile Cart) | 18 |
©Copyright Hobart Corporation 1999