Activate the on/off switch (6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.
For
Tips for the perfect shave
•We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.
•Hold the shaver at right angles (90°) to the skin (b). Stretch the skin and shave against the direction of beard growth.
•To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn.
Using the styler
•The wide shaper (4a) evenly cuts and trims larger areas (c): Ideal for shaping sideburns, moustaches and partial short beards. Press the blue rib to push out the styler (4).
•The narrow shaper (4b) precisely defines lines and edges (d): Ideal for precise contouring. To use the narrow shaper, push out the styler and turn it 180°.
•Frequent use of the styler may reduce the battery capacity.
Using the trimming attachment
•The trimming attachment (7) is ideal for beard trimming and keeping it at a constant length.
•Place the trimming attachment onto the shaver foil (2) and press it against the shaver housing until it snaps into place with a click.
•Press the beard length selector (8) (e) and slide it up in order to set the desired beard length (length settings from top to bottom 1.2 mm, 2.8 mm, 4.4 mm, 6 mm). Push out the styler (4).
•Activate the on/off switch and trim against hair growth by guiding the transparent comb part over the skin.
•After use, pull back the styler. Remove the trimming attachment (a).
Cleaning
This appliance is suitable for cleaning under an open water tap.
Warning: Detach the
Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:
10