Braun NUVL855RM24 manual Barrier, Handrail and Belt Manual Operation

Operation Notes and Details

Barrier, Handrail and Belt Manual Operation

The folding handrails and tall out- er barrier are manually operated. The spring-loaded outer barrier (tall barrier) and the handrails rest on the platform when the lift is not in use. The outer barrier must be raised to the vertical position and the handrails must be lifted to the vertical position whenever a pas- senger is on the platform.

The tall outer barrier and the handrails must be folded down to the platform (horizontal) posi- tion before stowing the lift. The handrails fold down onto the outer barrier to secure the barrier in the horizontal position. Each handrail is secured with a latch handle.

The latch handles must be lifted before the handrails can be folded or unfolded and must be lowered after folding or unfold- ing the handrails.

Interlocking Handrail Belt: The NUVL855RM24 is equipped with an interlocking handrail belt.

Once the lift platform has extend- ed fully from the stowed position, the belt must be latched in order to raise or lower the platform.

During the Stow function, the belt must be unfastened after the platform raises or lowers to stow level and stops. With the belt unlatched, pressing the STOW switch then retracts the platform fully.

WARNING

Before stowing lift:

•Lower outer barrier down to platform.

•Lower handrails down to platform.

•Lower latch handles down to platform.

Failure to follow these precautions may result in serious bodily injury and/or property damage.

Refer to the procedures on the following page for operation of the barrier and handrails.

Page 20