Maintenance and Lubrication Schedule
1500
Cycles
Lifting arm slots in rolling horizontial carriage arm tubes
Hydraulic cylinder pivot points (4 per cylinder)
Drive chain and chain rollers
Drive chain release latch mechanism
Deploy lift, remove inboard and outboard lower pans and blow out housing. Blow off platform also.
Deploy lift, remove inboard and outboard lower pans and clean housing tracks
Check drive chain tensioner, jam nuts and con- necting link for securement and/or misalignment.
Inspect drive chain release latch mechanism for proper operation, positive securement, wear or other damage
Apply Door Ease - See Lubrication Diagram. Apply to the surface area around both slots and wipe off excess
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Synthetic Grease - See Lubrication Dia- gram
Use compressor and nozzle to remove all debris from housing. Clean outboard lower pan slot and apply Antisieze to slot before reinstalling pan.
Use clean cloth and solvent to clean tracks. Clean outboard lower pan slot and apply Anti- sieze to slot before reinstalling pan.
Correct or replace damaged parts and/or relubri- cate. See Drive Chain Adjustment.
Correct or replace damaged parts and/or relu- bricate.
Page 45