Lift Components

Refer to the Lift Terminology Il- lustration on page 4.

Pump Module: The remote mounted pump module consists of the main hydraulic pump, the manual hand pump, the logic control board and other electrical components that power the lift electric/hydraulic systems.

Hand-held Pendant Con- trol: The hand-held pendant is equipped with four push button switches, (DOOR, STOW, DOWN and UP). The momentary switch- es activate the automatic lift functions. Simply press the switch labled for the intended function. The lift function labels illuminate to identify the function(s). Details

Lift Terminology

regarding the control switches and their functions are provided in the Lift Operation section.

Lift Housing: The lift housing is the metal structure (casing) mounted under the vehicle which contains and protects the platform carriage assembly. The hous- ing contains all lift components except the power (pump) module when the lift is in the stowed posi- tion.

Platform Carriage Assembly: The platform carriage assembly includes the platform assembly, the lifting arms, the rolling hori- zontal arms that carry the plat- form assembly in and out of the housing and the electrical/hydrau- lic drive components that power the lift.

Platform Assembly: The lift platform assembly consists of the ﬂat aluminum plate upon which the wheelchair is positioned, the outer barriers, the inner roll stop and shield handrails.

Outer Barrier: The two-stage outer barrier system consists of a spring-loaded tall barrier and an electric actuator-driven short bar- rier. The two-stage outer barrier provides a ramp for wheelchair loading and unloading at ground level. Photos and further details are provided in the Operation Notes and Details section (pages 18-21).

Inner Roll Stop: The NUV- L855RM24 is equipped with an automatic inner roll stop that also serves as the bridge plate. The

Page 6