Lift Operating Instructions
OPEN DOOR(S) AND SECURE
TO DEPLOY PLATFORM:
TO UNLOAD PASSENGER:
1.Stand clear and press the UP switch until the platform extends fully. Release switch.
2.Lift handrail latch handles, deploy (lift) handrails up to vertical position and lower handrail latch handles fully.
3.Lift outer barrier to vertical position.
4.Latch handrail belt.
5.Press the UP switch until the platform stops (raises to floor level) and inner roll stop unfolds to floor level. Release switch.
1.Read Note below! Load passenger onto plat- form and lock wheelchair brakes.
Note: Passenger must be positioned fully inside yellow boundaries, outer barrier must be UP and handrail belt must be latched.
2. Press DOWN switch until the entire platform reaches ground level and the outer barrier un- folds fully (ramp position). Release switch.
3. Unlatch handrail belt, unlock wheelchair brakes and unload passenger from platform.
Note: Outer barrier must be fully unfolded (ramp position) until the entire wheelchair (or standee) has crossed the outer barrier.
Page 28