Braun NUVL855RM24 manual 1500

Maintenance and Lubrication Schedule

	Inspect torque tube cams for securement, wear or	Resecure, replace or correct as needed.
	damage
1500	Inspect housing cam brackets for securement,	Resecure, replace or correct as needed.
Cycles	wear or damage
	Inspect cylinder(s), hoses, fittings and hydraulic	Tighten, repair or replace if needed.
	connections for wear, damage or leaks
	Inspect power cable	Resecure, repair or replace if needed.
	Perform all procedures listed in previous section also
	Hydraulic Fluid (Pump) - Check level. Note: Fluid	Use 5606 aviation fluid only (part 87010R-MILL).
	should be changed if there is visible contamination.	Check fluid level with platform lowered fully. Fill
	Inspect the hydraulic system (cylinder, hoses, fit-	to within 1-1/2" of the bottom of the fill tube (neck).
	tings, seals, etc.) for leaks if fluid level is low.
4500	Inspect lifting arm bushings and pivot pins for vis-	Replace if needed.
Cycles
	ible wear or damage
	Inspect outer barrier pivot pin mounting bolts (2)	Tighten or replace if needed
	Mounting	Check to see that the lift is securely anchored to
		the vehicle and there are no loose bolts, broken
		welds, or stress fractures.

Page 47