Chapter 3 Calling Other Videoconferencing Users
!To call another registered user
1.Open your application’s Dialing utility.
2.Enter the destination’s directory number and start the call.
If your videoconferencing system is registered with an online directory (if you’re not sure, consult with your system administrator), you can start videoconferences with registered users by selecting their names from a list.
Non-registered devices do not initially have directory numbers. To call them, enter the IP address, DNS name, or other E.164 number of the device in your application’s Dialer (when entering an IP address, do not enter leading zeroes). However, the administrator may subsequently assign directory numbers to them, which you may then use to call them. The administrator may also add the non- registered devices to your organization’s online directory, where you can dial them by selecting them. If you’re not sure, consult with your system administrator to find out if your destination has a directory number and/or is listed in the online directory.
8 | Mitel Networks 5700 VFA End Point’s Guide |
| |