Mitel 5700 manual Connecting to AN MCU Videoconference, To dial a videoconference through an MCU

Page 35

9CONNECTING TO AN MCU VIDEOCONFERENCE

Registered users may join videoconferences that are managed by an MCU that has registered and is logged in to the 5700 VFA. In order to connect, you only need to dial the directory number (assigned by the system administrator) of the required conference.

NOTE This section does not apply when the 5700 is connected to a 3300 ICP (Voice First Mode).

!To dial a videoconference through an MCU

1.Open your application’s Dialing utility.

2.Dial the directory number of the appropriate MCU conference.

Mitel Networks 5700 VFA End Point’s Guide	29

Image 35

Contents

End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page To log in to the 5700 VFA Initial Login to 5700 VFARegistering to the 5700 VFA Registration by a MeetingPoint 4.6 or Higher UserVCA Main Menu Registration by a 5760 VCA User323 Tab Registration by Other H.323 Videoconferencing User Videoconferencing with 5020/5220 IP Phones Videoconferencing in Non-Voice First ModeTo place a call using a 5020/5220 IP Phone Voice First Mode Calling Other Videoconferencing UsersTo call another registered user To set Call Forward Setting Call Forward in MeetingPointCall Forward Call Forward Calls Properties Select if you want to forward calls intended for you to Select if you want to forward ALL calls intended forYou to another user Are engaged in another videoconferenceForward if Busy Destination directory number71* or other code number To disable Call ForwardEntering a Call Forwarding Dialing Code 70* or other code numberCall Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup Pick Up Specific Call Dialog Box Call Pickup in MeetingPointTo pick up a call to a specific user Incoming Call To pick up any ringing callCall Pickup in Other H.323 Videoconferencing Applications Transfer Dialog Box Call TransferCall Transfer in MeetingPoint To transfer a call to another userCall Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Users from MeetingPoint AD-HOC ConferencingInviting Additional Users with 5020/5220 IP Phones Inviting Additional Users from MeetingPointInviting Users from 5760 VCA Inviting Additional Users from 5760 VCAAd-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference