Mitel 5700 manual Call Transfer in MeetingPoint, To transfer a call to another user

Page 25

6CALL TRANSFER

In a transferred call, the videoconference is transferred from the initiator to another user. The conference continues between the original remote party and the user that received the transfer. The user that initiated the transfer is disconnected from the videoconference.

NOTE When the 5700 VFA is connected to a 3300 ICP (Voice First Mode), you do not need to program these settings (the 5700 VFA uses the Call Transfer settings of the 3300 ICP).

6.1Call Transfer in MeetingPoint® 4.6

!To transfer a call to another user

1.In MeetingPoint’s Conference Panel, click the Services arrow and then click Transfer. The Transfer dialog box appears.

Transfer Dialog Box

2.In the Destination box, enter the directory number of the user that will receive the call by one of the following methods:

—Type the number or click it in the list. -or-

—Click Browse at the end of the row. In the Select an Entry dialog box, select the user and click OK (see page 4-11 for an illustration).

3.Click OK.

The call is transferred to this user. If that party accepts the call, you are disconnected from the videoconference. The call continues between the original remote party and the newly-joined party.

Mitel Networks 5700 VFA End Point’s Guide	19

Image 25

Contents End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page Registering to the 5700 VFA Initial Login to 5700 VFARegistration by a MeetingPoint 4.6 or Higher User To log in to the 5700 VFAVCA Main Menu Registration by a 5760 VCA User323 Tab Registration by Other H.323 Videoconferencing User To place a call using a 5020/5220 IP Phone Voice First Mode Videoconferencing in Non-Voice First ModeCalling Other Videoconferencing Users Videoconferencing with 5020/5220 IP PhonesTo call another registered user Call Forward Setting Call Forward in MeetingPointTo set Call Forward Call Forward Calls Properties You to another user Select if you want to forward ALL calls intended forAre engaged in another videoconference Select if you want to forward calls intended for you toForward if Busy Destination directory numberEntering a Call Forwarding Dialing Code To disable Call Forward70* or other code number 71* or other code numberCall Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup To pick up a call to a specific user Call Pickup in MeetingPointPick Up Specific Call Dialog Box Incoming Call To pick up any ringing callCall Pickup in Other H.323 Videoconferencing Applications Call Transfer in MeetingPoint Call TransferTo transfer a call to another user Transfer Dialog BoxCall Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Additional Users with 5020/5220 IP Phones AD-HOC ConferencingInviting Additional Users from MeetingPoint Inviting Users from MeetingPointInviting Users from 5760 VCA Inviting Additional Users from 5760 VCAAd-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference