Mitel 5700 manual Entering a Call Forwarding Dialing Code, To disable Call Forward

Page 19

Chapter 4 Call Forward

Entering a Call Forwarding Dialing Code

!To disable Call Forward

1.Open your application’s Dialing utility.

2.Dial one of the following (bold values are factory defaults:

To disable this feature	Dial this number
Forward if No Answer	70 (or other code number)
Forward if Busy	71 (or other code number)
Unconditional	72 (or other code number)
forwarding

NOTE After dialing, a “Call Rejected” message appears. However, the request is accepted by the Administrator application anyway.

Mitel Networks 5700 VFA End Point’s Guide	13

Image 19

Contents

End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page To log in to the 5700 VFA Initial Login to 5700 VFARegistering to the 5700 VFA Registration by a MeetingPoint 4.6 or Higher UserVCA Main Menu Registration by a 5760 VCA User323 Tab Registration by Other H.323 Videoconferencing User Videoconferencing with 5020/5220 IP Phones Videoconferencing in Non-Voice First ModeTo place a call using a 5020/5220 IP Phone Voice First Mode Calling Other Videoconferencing UsersTo call another registered user Call Forward Setting Call Forward in MeetingPointTo set Call Forward Call Forward Calls Properties Select if you want to forward calls intended for you to Select if you want to forward ALL calls intended forYou to another user Are engaged in another videoconferenceForward if Busy Destination directory number71* or other code number To disable Call ForwardEntering a Call Forwarding Dialing Code 70* or other code numberCall Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup To pick up a call to a specific user Call Pickup in MeetingPointPick Up Specific Call Dialog Box Incoming Call To pick up any ringing callCall Pickup in Other H.323 Videoconferencing Applications Transfer Dialog Box Call TransferCall Transfer in MeetingPoint To transfer a call to another userCall Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Users from MeetingPoint AD-HOC ConferencingInviting Additional Users with 5020/5220 IP Phones Inviting Additional Users from MeetingPointInviting Users from 5760 VCA Inviting Additional Users from 5760 VCAAd-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference