Mitel 5700 manual Starting a Call Through a Gateway, To start a LAN-to-ISDN call through a gateway

Page 33

8STARTING A CALL THROUGH A GATEWAY

You can start a videoconference from a LAN connection to an ISDN destination through a gateway. The default function code for starting a call through a gateway is 9. The system administrator may change this code, if necessary

(see the Mitel Networks 5700 Voice First Application Administrator’s Guide).

NOTE You cannot make an external call in Voice First mode.

!To start a LAN-to-ISDN call through a gateway

"In the LAN Manual Dialer, dial [gateway’s service access number][1st ISDN number].

Set the required Bandwidth or use the default bandwidth. To display the Bandwidth, click Options.

Enter service access number + ISDN no.

Select the required bandwidth.

Click Options.

Dialing a LAN-to-ISDN Call Through a Gateway (in MeetingPoint 4.6)

Mitel Networks 5700 VFA End Point’s Guide

27

 

 

Image 33
Contents End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page Registering to the 5700 VFA Initial Login to 5700 VFARegistration by a MeetingPoint 4.6 or Higher User To log in to the 5700 VFAVCA Main Menu Registration by a 5760 VCA User323 Tab Registration by Other H.323 Videoconferencing User To place a call using a 5020/5220 IP Phone Voice First Mode Videoconferencing in Non-Voice First ModeCalling Other Videoconferencing Users Videoconferencing with 5020/5220 IP PhonesTo call another registered user Setting Call Forward in MeetingPoint Call ForwardTo set Call Forward Call Forward Calls Properties You to another user Select if you want to forward ALL calls intended forAre engaged in another videoconference Select if you want to forward calls intended for you toForward if Busy Destination directory numberEntering a Call Forwarding Dialing Code To disable Call Forward70* or other code number 71* or other code numberCall Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup Call Pickup in MeetingPoint To pick up a call to a specific userPick Up Specific Call Dialog Box Incoming Call To pick up any ringing callCall Pickup in Other H.323 Videoconferencing Applications Call Transfer in MeetingPoint Call TransferTo transfer a call to another user Transfer Dialog BoxCall Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Additional Users with 5020/5220 IP Phones AD-HOC ConferencingInviting Additional Users from MeetingPoint Inviting Users from MeetingPointInviting Users from 5760 VCA Inviting Additional Users from 5760 VCAAd-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference