Mitel manual Registering to the 5700 VFA, Registration by a MeetingPoint 4.6 or Higher User

Page 9

2REGISTERING TO THE 5700 VFA

The registration procedure varies slightly, depending on the user’s videoconferencing application.

•MeetingPoint® 4.6 with 5700 VFA support

•Mitel Networks 5760 Video Conference Appliance

•Other H.323 Rev. 2-compliant videoconferencing systems

2.1Registration by a MeetingPoint® 4.6 (or Higher) User

!To log in to the 5700 VFA

1.In the Windows Desktop, click Start, point to Programs and then click the VCON MeetingPoint command. The MeetingPoint Startup screen appears, followed by the Login dialog box.

Initial Login to 5700 VFA

Return Login to 5700 VFA

NOTE Running MeetingPoint disables the computer’s screensaver.

2.Enter login information as follows:

5700 VFA (MXM)	Your user name as listed in the 5700 VFA database and
Login Name	the 5700 VFA Administrator.
Password	Password required for you to log in to the 5700 VFA. If
	you do not supply this password, the login request is
	rejected.

Mitel Networks 5700 VFA End Point’s Guide	3

Image 9

Contents End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page Registering to the 5700 VFA Initial Login to 5700 VFARegistration by a MeetingPoint 4.6 or Higher User To log in to the 5700 VFAVCA Main Menu Registration by a 5760 VCA User323 Tab Registration by Other H.323 Videoconferencing User To place a call using a 5020/5220 IP Phone Voice First Mode Videoconferencing in Non-Voice First ModeCalling Other Videoconferencing Users Videoconferencing with 5020/5220 IP PhonesTo call another registered user Setting Call Forward in MeetingPoint Call ForwardTo set Call Forward Call Forward Calls Properties You to another user Select if you want to forward ALL calls intended forAre engaged in another videoconference Select if you want to forward calls intended for you toForward if Busy Destination directory numberEntering a Call Forwarding Dialing Code To disable Call Forward70* or other code number 71* or other code numberCall Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup Call Pickup in MeetingPoint To pick up a call to a specific userPick Up Specific Call Dialog Box Incoming Call To pick up any ringing callCall Pickup in Other H.323 Videoconferencing Applications Call Transfer in MeetingPoint Call TransferTo transfer a call to another user Transfer Dialog BoxCall Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Additional Users with 5020/5220 IP Phones AD-HOC ConferencingInviting Additional Users from MeetingPoint Inviting Users from MeetingPointInviting Users from 5760 VCA Inviting Additional Users from 5760 VCAAd-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference