Mitel OpenPhone 27 manual About Silent Charging, Icon Battery Charge Level

Page 10

Icon

Battery Charge Level

dghfd

80 to 100 %

 

60 to 80 %

 

40 to 60 %

 

20 to 40 %

 

0 to 20 %

 

Flashing; battery is almost discharged; warning signal sounds

 

 

When the battery is nearly depleted, you will hear three short beeps repeated once a minute. If you hear this warning signal while on a call, you have approximately 3 minutes left before the handset will switch off.

About Silent Charging

Use Silent Charging if you don’t want calls to ring your OP27 phone while it is charging. Typically, you use this feature if your Mitel IP Phone has been associated (programmed into a suite on the 3300 ICP) with your OP27 phone. Then, while your phone is charging, calls to your extension will now only ring on your Mitel IP Phone.

If Silent Charging is active while the handset is in the charger, “Silent Charging” will appear in display and the handset is disengaged from the system. When you remove the handset from the charger, it is automatically engaged with the system and you can make and receive calls again.

Page 6

Image 10
Contents OpenPhone 27 Handset User Guide April Table of Contents Call Handling About Your Handset Features and FunctionsAbout the Keys Multiple Ringer Settings Contacting Emergency ServicesSelectable Volume 7 levels Important Note for Headset Users Tips for your Comfort and SafetyAbout Feature Access Codes For Users on Resilient 3300 ICP SystemsInserting and Removing the Battery Pack Setting up the ChargerChoosing a Location Connecting the Charger Charging the BatteriesIcon Battery Charge Level About Silent ChargingAbout the Display Indicators Powering the OP27 Phone On / OffGetting Started Call handling menu features System menu featuresLocal Settings features Local mode featuresPage Changing the Language Setting the VolumeCustomizing Your Phone To change the language of the local menuTo set the ringer options Setting the RingerSetting Your Name To set your nameAdjusting the Contrast To adjust the contrastSetting the Optional Features Using Handset FeaturesActivating Key Lock To set an alarm Setting an AlarmUsing the SOS Key To stop an alarmTo dial the SOS number Answering a Call Making and Answering CallsHandsfree Operation To use the system phonebook Press Phonebook Using the System PhonebookUsing your Personal Phonebook To add a personal phonebook entryTo search for an entry in your personal phonebook To place a call using your personal phonebookTo delete a personal phonebook entry Saved Number Redial Internal or External Redial External NumbersSpeed Call Personal To enable or disable headset auto-answer To enable or disable auto-answerTo answer a call when you hear ringback Auto-AnswerHold Call HandlingTransfer To leave a conference ConferenceSwap To alternate between the two partiesTo program Call Forward Call ForwardTo turn Call Forward on and off once it has been programmed Page To cancel all Callbacks To cancel a CallbackCallback To respond to a message waiting condition on your telephone To set or change a passwordMessaging Callback To check for messages from a remote stationTo clear a password Account Codes Using Advanced FeaturesAttendant Call Hold Remote Retrieve Call ParkCamp-on Call PickupDo Not Disturb Reminder OverrideGroup Paging / Meet Me Answer Trunk Flash To respond to a Group Page by using Meet Me AnswerTo flash a trunk while talking on an outside call Regulatory Aapprovals Index