Setting up the Charger
Choosing a Location
Place the charger on a flat, even surface within 2.5 m of a 230 Vac mains connection. Do not locate the charger in the following areas:
•damp areas
•areas with direct sunlight
•inadequately ventilated areas
•strong magnetic fields (keep the charger at least 0.5 m away from electrical devices, such as fluorescent lamps, computers, radios, television sets, fax machines and other telephones)
•dusty environments
•areas subject to vibration, shock, or extreme temperature fluctuations
Keep the handset and accessories out of reach of small children.
Inserting and Removing the Battery Pack
Only use the following type of battery in your telephone: Size: AAA
Type:
Capacity: 700 mAh
Mitel does not accept any responsibility for malfunction or damage if you use other types of rechargeable or normal batteries.
To insert or remove the battery pack:
1.Insert the point of a pen into the hole in the bottom of the handset cover to release the pin; then remove the cover and insert or remove the batteries.
2.While inserting batteries, ensure that you position the battery contacts correctly; otherwise, your handset could be damaged.
Page 4