Mitel OpenPhone 27 manual Getting Started, Powering the OP27 Phone On / Off

Page 11

Getting Started

Powering the OP27 Phone On / Off

To power on:

Press while in the standby (Off) mode.

To power off:

While in idle mode, press for at least 2 seconds.

About the Display Indicators

The OP27 phone provides visual indicators for the following features and functions:

Icon

Description

 

*

Handset is operating in Resilient mode.

 

 

 

Handset mode is enabled. When you obtain dial tone, the icon appears

 

on the display.

 

 

Indicates the strength of the radio signal in use by your handset (four

 

levels).

 

 

Indicates the battery charge level (five levels).

 

 

 

Battery is empty. You will hear a battery-low warning alarm (3 beeps) in idle

 

state or conversation state once every minute. When you hear the warning

(Flashing)

alarm, you have approximately 3 minutes left before the handset will shut

 

down.

 

;

Loud speaker mode is enabled; when you obtain dial tone, the ; icon

 

appears on the display and the loudspeaker key turns on.

 

Ringer is disabled.

 

 

 

 

 

Keypad is locked. Press

and then press # to unlock the keypad.

 

Alarm reminder is set.

 

 

 

 

Page 7

Image 11
Contents OpenPhone 27 Handset User Guide April Table of Contents Call Handling About the Keys Features and FunctionsAbout Your Handset Selectable Volume 7 levels Contacting Emergency ServicesMultiple Ringer Settings For Users on Resilient 3300 ICP Systems Tips for your Comfort and SafetyAbout Feature Access Codes Important Note for Headset UsersChoosing a Location Setting up the ChargerInserting and Removing the Battery Pack Charging the Batteries Connecting the ChargerAbout Silent Charging Icon Battery Charge LevelGetting Started Powering the OP27 Phone On / OffAbout the Display Indicators Local mode features System menu featuresLocal Settings features Call handling menu featuresPage To change the language of the local menu Setting the VolumeCustomizing Your Phone Changing the LanguageTo set your name Setting the RingerSetting Your Name To set the ringer optionsTo adjust the contrast Adjusting the ContrastActivating Key Lock Using Handset FeaturesSetting the Optional Features To stop an alarm Setting an AlarmUsing the SOS Key To set an alarmTo dial the SOS number Handsfree Operation Making and Answering CallsAnswering a Call To add a personal phonebook entry Using the System PhonebookUsing your Personal Phonebook To use the system phonebook Press PhonebookTo delete a personal phonebook entry To place a call using your personal phonebookTo search for an entry in your personal phonebook Speed Call Personal Redial External NumbersSaved Number Redial Internal or External Auto-Answer To enable or disable auto-answerTo answer a call when you hear ringback To enable or disable headset auto-answerTransfer Call HandlingHold To alternate between the two parties ConferenceSwap To leave a conferenceTo turn Call Forward on and off once it has been programmed Call ForwardTo program Call Forward Page Callback To cancel a CallbackTo cancel all Callbacks To check for messages from a remote station To set or change a passwordMessaging Callback To respond to a message waiting condition on your telephoneTo clear a password Call Park Using Advanced FeaturesAttendant Call Hold Remote Retrieve Account CodesDo Not Disturb Call PickupCamp-on Group Paging / Meet Me Answer OverrideReminder To flash a trunk while talking on an outside call To respond to a Group Page by using Meet Me AnswerTrunk Flash Regulatory Aapprovals Index