Toshiba DKT2104-CT manual Transfer Calls to the DKT, Using Camp-on

Page 47

Handset Operation

Transferring Calls

Transfer Calls to the DKT

1.Press +2/' on the cordless handset.

2.Pick up the DKT telephone and press the flashing Line LED.

Using Camp-on

1.Press￿&1)￿751.

2.Enter the destination [DN], Hunt Group number, or ACD group [DN].

3.When the [DN] answers, announce the call.

4.Press WDON

...or /LQH, [DN] +

￿￿to reconnect to the transferred line before the call is answered or busy tone is received.

You hear dial tone and the Line or [DN] LED flashes at the conference rate.

You hear a single tone.

Note If the call was made with Tone Signaling instead of Voice First Signaling, you hear ringing tone.

If the called station does not answer, you receive a recall ring (when your station or [DN] is idle). The ring is set by system programming.

The Line LED changes to steady when the called station connects with the transferred call.

The Line LED changes to steady red when the called station connects with the transferred call. After you hang up, the Line LED begins to flash at the on-hold rate or if you transferred the call from a [DN], the [DN] LED goes out. The CO Line or [DN] camps onto the called station and the called station receives a warning tone.

You receive a recall ring when your station or [DN]￿is idle and camp-on is cancelled when the called station user fails to answer within a predetermined time.

Repeat the procedure if necessary.

Strata DKT2104-CT Cordless Digital Telephone 5/00

35

Image 47
Contents Digital Business Telephone Systems DKT2104-CT Cordless Digital Telephone User GuidePublication Information Contents Chapter Handset Operation Chapter ConfigurationIii FeaturesDo Not Disturb Appendix Contents Introduction Viii OrganizationConventions See Figure Action/Response TableRelated Documents and Media Grand Tour Handset Digital TechnologyFkdq Charger Unit Base UnitBatteries Volume LevelsHandset Mute Cordless Digital Telephone Standard Parts BatteryDesk Cordless Review Safety Instructions InstallationInstallation Strata DKT2104-CT Cordless Digital Telephone 5/00 Mount on a Wall Select LocationSnap the Base Unit onto the plate shown above To connect to a Strata DKT Connect Telephone CablesTo connect as a stand-alone telephone Charger Unit Connect and Apply PowerBase Unit Raise the Base Unit Antenna Install Handset BatteryCharge Batteries for First Time Install Headset Optional To remove the belt clip Install Belt ClipInstallation Configuration3 Enter the Program Mode While holding and , press Wdon shown at right Press to toggle the settings for each program step Handset Operation $3512 To set the cordless modeTo answer a Tone First Signaling call Tone or Voice First SignalingTo set DKT mode To change the signalingMute Your Conversation Controlling Ringer and Handset VolumeHandset Volume Ringer VolumeDial a DN Making CallsMaking Calls Internal NumbersExternal Numbers Recall/Override Busy Stations Answering CallsSpecific Console Using CO Line Access CodesCalling the Attendant Console Any ConsoleUsing Isdn Trunks Active Calls Transferring CallsTransfer Calls to the Cordless Answering Transferred CallTransfer Calls to the DKT Using Camp-onAdd a Second Line Conferencing CallsAdd a Station Handset Operation Features Emergency Override of Forced Account Codes Account CodesForced Account Codes Verified Account Codes Voluntary Account CodesAutomatic Callback Alarm ResetAlert Signaling Automatic Busy RedialSet Line Queuing Line QueuingCall Forward Auto RedialCall Forward-Busy Call Forward-All CallsTo set CF-No Answer Call Forward-No AnswerCall Forward-Busy/No Answer Call Forward-CancelSet CF-External Call Forward-ExternalCall Park Orbits Release 3 or Later Cancel CF-ExternalCall Forward-Fixed Call Park Retrieving Parked CallsGroup Pickup Call PickupDirected Call Pickup CO Line PickupDirect Station Selection Buttons Hotline Call WaitingDoor Unlock Do Not DisturbMonitoring Door Telephones Door TelephoneAnswering Calls at Your Station Answering Calls at Other StationsPlacing Handsfree Answerback Calls on Hold Calls on HoldPlacing Line Appearances or DN Calls on Hold Retrieving Held Calls Using Automatic HoldSwitching Between Calls Subaddress Isdn Outgoing CallingLCD Name/Number Display Create LCD Messages Cancel LCD MessagesMessaging Message WaitingAnswer Messages Waiting Cancel Messages WaitingSet a DN/PhDN Message Waiting Light Cancel a Called Station Message Waiting LightPhDN/MW Message Waiting Cancel the Message Waiting LightActivating Off-hook Announce OCA Handset Calling Using Voice First SignalingOff-hook Call Announce OCA Handset Calling Using Tone Signaling Speaker OCA Using Tone Signaling Speaker OCA Using Voice First SignalingExecutive Override Override CallsBusy Override DND OverridePrivacy Override AnnouncementsPrivacy On-Line Privacy Override To deactivate Privacy Release Privacy ReleaseRelease and Answer Storing Station Speed Dial Numbers Speed DialStored Station or System Speed Dial Calling To call using SDTimed Reminders To call using SD access codesDesktop displays%07,%$$&&..$1*25$773300&&$30$ Toll Restriction Override To cancel a Timed ReminderTwo Tandem Line Connection To supervise a tandem call and release it Features Appendix TroubleshootingAppendix Simultaneous Conversation Channels Range and PerformanceRadio Interference SpecificationsTelephone User Guide for information Access CodesWdon + ~ Appendix Feature Access Codes CO Line Access CodesPaging Group Codes Paging Groups Access CodeSystem Codes that Link to Other Codes Speed Dial Access CodesIndex LCD SP-OCA Index

DKT2104-CT specifications

The Toshiba DKT2104-CT is a robust and feature-rich digital telephone designed specifically for office environments, offering a blend of functionality and user-friendliness. Its design prioritizes user experience, making it an ideal choice for businesses of varying sizes.

One of the standout features of the DKT2104-CT is its ergonomic layout. The phone is equipped with a large, easy-to-read LCD display that shows essential information such as caller ID, call duration, and menu navigation options. This display enhances the usability for users, allowing them to access important information at a glance without fumbling through menus.

The Toshiba DKT2104-CT offers a total of 14 programmable keys, which can be customized for various functions according to the user's preferences. These keys can be assigned to frequently dialed numbers, facilitating quick call access and enhancing overall productivity. Additionally, the phone includes dedicated keys for features such as hold, transfer, conference, and redial, streamlining communication processes during busy workdays.

In terms of audio quality, the DKT2104-CT utilizes advanced speakerphone and handset technologies that ensure crystal-clear voice quality during calls. This is particularly beneficial in professional settings where clear communication is crucial. Furthermore, the phone supports a range of audio enhancements, including volume control, to adapt to different audio environments.

Another notable characteristic of the DKT2104-CT is its integration capabilities. The phone is designed to work seamlessly within the Toshiba Strata CIX series, allowing users to take advantage of a centralized communication system. This integration supports features such as voicemail access, call forwarding, and caller screening, enhancing the overall communication experience for users.

The DKT2104-CT also emphasizes reliability and durability, essential for equipment used in high-traffic office settings. Built with quality materials, it is designed to withstand everyday use, ensuring that it remains a staple within the business environment for years to come.

In summary, the Toshiba DKT2104-CT embodies a perfect combination of advanced features, user-friendly design, and reliable performance, making it an excellent choice for businesses looking to enhance their communication capabilities. Its programmable keys, audio quality, and integration with larger telephony systems make it an efficient tool for fostering productive workplace interactions.