Toshiba DKT2104-CT Call Forward-Fixed, Cancel CF-External, Call Park Orbits Release 3 or Later

Page 61

Features

Call Park Orbits (Release 3 or Later)

Cancel CF–External

1.Press the [PDN] +

+ WDON.

2.Enter the [DN] to which calls are forwarded.

3.Press WDON.

You hear confirmation tone.

Call Forward–Fixed

This feature is not supported by the DKT2104-CT. It must be assigned to your DKT.

Call Park Orbits (Release 3 or Later)

The Call Park Orbit feature holds a call temporarily in an orbit for anyone to retrieve. You can retrieve from the same or a different station. There are 20 General Park Orbits for the system and 1 Personal Park Orbit for each station. Once you have parked a call in an orbit, you can:

♦Hang up and retrieve the parked call at a later time.

♦Originate another call.

♦Access a voice paging device to announce the parked call for pickup from another station.

If you park a call and your station is idle while the system Call Park recall timer expires, the parked call automatically recalls to your station. If your station is busy, the parked call camps onto your station.

1.Press &1)751 +

.

2.Enter a General Orbit number (~)

The Line or [DN] LED flashes at the consultation-hold rate until you enter the orbit number.

After dialing the orbit number, you hear a short dial tone and the call is parked. The Line LED flashes at the Hold rate, or the [DN] LED goes out.

Strata DKT2104-CT Cordless Digital Telephone 5/00

49

Image 61

Contents Digital Business Telephone Systems DKT2104-CT Cordless Digital Telephone User GuidePublication Information Contents Chapter Handset Operation Chapter ConfigurationIii FeaturesDo Not Disturb Appendix Contents Introduction Conventions OrganizationViii See Figure Action/Response TableRelated Documents and Media Grand Tour Handset Digital TechnologyFkdq Charger Unit Base UnitBatteries Volume LevelsHandset Mute Cordless Digital Telephone Standard Parts BatteryDesk Cordless Review Safety Instructions InstallationInstallation Strata DKT2104-CT Cordless Digital Telephone 5/00 Mount on a Wall Select LocationSnap the Base Unit onto the plate shown above To connect as a stand-alone telephone Connect Telephone CablesTo connect to a Strata DKT Base Unit Connect and Apply PowerCharger Unit Raise the Base Unit Antenna Install Handset BatteryCharge Batteries for First Time Install Headset Optional To remove the belt clip Install Belt ClipInstallation Configuration3 Enter the Program Mode While holding and , press Wdon shown at right Press to toggle the settings for each program step Handset Operation $3512 To set the cordless modeTo set DKT mode Tone or Voice First SignalingTo change the signaling To answer a Tone First Signaling callHandset Volume Controlling Ringer and Handset VolumeRinger Volume Mute Your ConversationExternal Numbers Making CallsMaking Calls Internal NumbersDial a DN Recall/Override Busy Stations Answering CallsCalling the Attendant Console Using CO Line Access CodesAny Console Specific ConsoleUsing Isdn Trunks Active Calls Transferring CallsTransfer Calls to the Cordless Answering Transferred CallTransfer Calls to the DKT Using Camp-onAdd a Second Line Conferencing CallsAdd a Station Handset Operation Features Forced Account Codes Account CodesEmergency Override of Forced Account Codes Verified Account Codes Voluntary Account CodesAlert Signaling Alarm ResetAutomatic Busy Redial Automatic CallbackSet Line Queuing Line QueuingCall Forward Auto RedialCall Forward-Busy Call Forward-All Calls To set CF-No Answer Call Forward-No AnswerCall Forward-Busy/No Answer Call Forward-CancelSet CF-External Call Forward-ExternalCall Forward-Fixed Cancel CF-ExternalCall Park Orbits Release 3 or Later Call Park Retrieving Parked CallsDirected Call Pickup Call PickupCO Line Pickup Group PickupDirect Station Selection Buttons Hotline Call WaitingDoor Unlock Do Not DisturbAnswering Calls at Your Station Door TelephoneAnswering Calls at Other Stations Monitoring Door TelephonesPlacing Line Appearances or DN Calls on Hold Calls on HoldPlacing Handsfree Answerback Calls on Hold Switching Between Calls Using Automatic HoldRetrieving Held Calls Subaddress Isdn Outgoing CallingLCD Name/Number Display Messaging Cancel LCD MessagesMessage Waiting Create LCD MessagesAnswer Messages Waiting Cancel Messages WaitingSet a DN/PhDN Message Waiting Light Cancel a Called Station Message Waiting LightPhDN/MW Message Waiting Cancel the Message Waiting LightOff-hook Call Announce OCA Handset Calling Using Voice First SignalingActivating Off-hook Announce OCA Handset Calling Using Tone Signaling Speaker OCA Using Tone Signaling Speaker OCA Using Voice First SignalingBusy Override Override CallsDND Override Executive OverridePrivacy On-Line AnnouncementsPrivacy Override Privacy Override To deactivate Privacy Release Privacy ReleaseRelease and Answer Storing Station Speed Dial Numbers Speed DialStored Station or System Speed Dial Calling To call using SDTimed Reminders To call using SD access codesDesktop displays%07,%$$&&..$1*25$773300&&$30$ Toll Restriction Override To cancel a Timed ReminderTwo Tandem Line Connection To supervise a tandem call and release it Features Appendix TroubleshootingAppendix Simultaneous Conversation Channels Range and PerformanceRadio Interference SpecificationsTelephone User Guide for information Access CodesWdon + ~ Appendix Feature Access Codes CO Line Access CodesPaging Group Codes Paging Groups Access CodeSystem Codes that Link to Other Codes Speed Dial Access CodesIndex LCD SP-OCA Index