Toshiba DKT2104-CT manual Call Forward-All Calls, Call Forward-Busy

Page 57

Features

Call Forward

When you forward calls to another station, the CF type and the from/to stations display on your LCD.

Note CF–All Calls, CF–No Answer, and CF–Busy can only be activated when Speed Dial is assigned to one of the flexible buttons or deleted from all buttons (use ). See “Access Codes” on Page 83.

Call Forward–All Calls

If your station is idle or busy and has this feature activated, all calls are forwarded immediately. The station does not ring.

1.Press a [PDN] or [PhDN] + .

2.Enter the [DN] to which calls are forwarded.

3.Press WDON.

You hear a confirmation tone.

Note [PhDNs] can only be forwarded by using the dial codes.

Call Forward–Busy

Calls to your handset while you are busy on another call or in the DND mode forward immediately if this feature is set. If your handset is idle, incoming calls ring normally.

1.Press a [PDN] or [PhDN] + .

2.Enter the [DN] of the forwarded to station.

You hear confirmation tone.

Note [PhDNs] can only be forwarded using dial codes.

The Call Frwd Busy LED lights steady and calls are forwarded to the stored station number.

Strata DKT2104-CT Cordless Digital Telephone 5/00

45

Image 57

Contents Digital Business Telephone Systems DKT2104-CT Cordless Digital Telephone User GuidePublication Information Contents Chapter Handset Operation Chapter ConfigurationIii FeaturesDo Not Disturb Appendix Contents Introduction Organization ConventionsViii See Figure Action/Response TableRelated Documents and Media Grand Tour Handset Digital TechnologyFkdq Charger Unit Base UnitBatteries Volume LevelsHandset Mute Cordless Digital Telephone Standard Parts BatteryDesk Cordless Review Safety Instructions InstallationInstallation Strata DKT2104-CT Cordless Digital Telephone 5/00 Mount on a Wall Select LocationSnap the Base Unit onto the plate shown above Connect Telephone Cables To connect as a stand-alone telephoneTo connect to a Strata DKT Connect and Apply Power Base UnitCharger Unit Raise the Base Unit Antenna Install Handset BatteryCharge Batteries for First Time Install Headset Optional To remove the belt clip Install Belt ClipInstallation Configuration3 Enter the Program Mode While holding and , press Wdon shown at right Press to toggle the settings for each program step Handset Operation $3512 To set the cordless modeTo set DKT mode Tone or Voice First SignalingTo change the signaling To answer a Tone First Signaling callHandset Volume Controlling Ringer and Handset VolumeRinger Volume Mute Your ConversationMaking CallsMaking Calls Internal Numbers External NumbersDial a DN Recall/Override Busy Stations Answering CallsCalling the Attendant Console Using CO Line Access CodesAny Console Specific ConsoleUsing Isdn Trunks Active Calls Transferring CallsTransfer Calls to the Cordless Answering Transferred CallTransfer Calls to the DKT Using Camp-onAdd a Second Line Conferencing CallsAdd a Station Handset Operation Features Account Codes Forced Account CodesEmergency Override of Forced Account Codes Verified Account Codes Voluntary Account Codes Alert Signaling Alarm Reset Automatic Busy Redial Automatic CallbackSet Line Queuing Line QueuingCall Forward Auto RedialCall Forward-Busy Call Forward-All CallsTo set CF-No Answer Call Forward-No AnswerCall Forward-Busy/No Answer Call Forward-CancelSet CF-External Call Forward-ExternalCancel CF-External Call Forward-FixedCall Park Orbits Release 3 or Later Call Park Retrieving Parked CallsDirected Call Pickup Call PickupCO Line Pickup Group PickupDirect Station Selection Buttons Hotline Call WaitingDoor Unlock Do Not DisturbAnswering Calls at Your Station Door TelephoneAnswering Calls at Other Stations Monitoring Door TelephonesCalls on Hold Placing Line Appearances or DN Calls on HoldPlacing Handsfree Answerback Calls on Hold Using Automatic Hold Switching Between CallsRetrieving Held Calls Subaddress Isdn Outgoing CallingLCD Name/Number Display Messaging Cancel LCD MessagesMessage Waiting Create LCD MessagesAnswer Messages Waiting Cancel Messages WaitingSet a DN/PhDN Message Waiting Light Cancel a Called Station Message Waiting LightPhDN/MW Message Waiting Cancel the Message Waiting LightHandset Calling Using Voice First Signaling Off-hook Call Announce OCAActivating Off-hook Announce OCA Handset Calling Using Tone Signaling Speaker OCA Using Tone Signaling Speaker OCA Using Voice First SignalingBusy Override Override CallsDND Override Executive OverrideAnnouncements Privacy On-LinePrivacy Override Privacy Override To deactivate Privacy Release Privacy ReleaseRelease and Answer Storing Station Speed Dial Numbers Speed DialStored Station or System Speed Dial Calling To call using SDTimed Reminders To call using SD access codesDesktop displays%07,%$$&&..$1*25$773300&&$30$ Toll Restriction Override To cancel a Timed ReminderTwo Tandem Line Connection To supervise a tandem call and release it Features Appendix TroubleshootingAppendix Simultaneous Conversation Channels Range and PerformanceRadio Interference SpecificationsTelephone User Guide for information Access CodesWdon + ~ Appendix Feature Access Codes CO Line Access CodesPaging Group Codes Paging Groups Access CodeSystem Codes that Link to Other Codes Speed Dial Access CodesIndex LCD SP-OCA Index