Chapter 5 Parameters and Defaults
Tone Configuration Parameters
Table
Component | Setting | Explanation |
|
|
|
NumOfRepeats | 5 | First |
|
| (plays once and then repeats five times), then |
|
| the second |
|
|
|
TotalToneTime | 0 | Tone plays continuously (set of two |
|
| pairs of the cadence repeat continuously) until |
|
| another call event stops the tone |
|
|
|
Recommended Values
The following settings are recommended for the US:
•DialTone = "2,31538,30831,1380,1740,1,0,0,1000" (approximately
•BusyTone = "2,30467,28959,1191,1513,0,4000,4000,0" (approximately
•ReorderTone = "2,30467,28959,1191,1513,0,2000,2000,0" (approximately
•RingBackTone = "2,30831,30467,1943,2111,0,16000,32000,0" (approximately
•CallWaitTone = "1,30831,0,5493,0,0,2400,2400,4800" (approximately
•AlertTone = “1,30467,0,5970,0,0,480,480,1920”
Note For detailed recommendations of
Specific Tone Parameter Information
Brief descriptions, and lists of default values and the voice configuration menu code for each Cisco ATA tone parameter, appear in the following sections:
•DialTone, page
•BusyTone, page
•ReorderTone, page
•RingbackTone, page
•CallWaitTone, page
•AlertTone, page
DialTone
Description
The Cisco ATA plays the dial tone when it is ready to accept the first digit of a remote address to make an outgoing call.
Default values (using the Basic format)
•NumOfFreqs—2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
|
| |
|