3. | Press a line button to dial out on. |
| |
4. | Press | . The system will redial the last number dialed, and | |
| wait 30 seconds. |
| |
NOTE: If the called party answers, you may pick up the handset, or press | |||
| the | button to stop the auto redial. |
|
5. | If the you do not pick up the handset or press the | button, the | |
| telephone will hang up, wait 60 seconds, and dial again. This process | ||
| will repeat for up to 10 times. |
| |
NOTE: You may stop the process any time by pressing the | button. |
Ring Type Programming
This feature allows you to select one of the four ringer types for each of the four lines.
1. Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Ring Type” item.
3. Press the right arrow key to select this item.
4. Press the up or down arrow key to select a line.
5. Press the right arrow key to confirm your selection.
6. Press the up or down arrow key to select a ring type.
7. Press the right arrow key to confirm your selection.
Reset the Phone
This feature allows you to clear all the programmed data and all parameters back to the default values.
1. Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Reset All” item.
3. Press the right arrow key to select this item.
4. Press the right arrow key again within 3 seconds to confirm your selection.
The default values are as follows:
1. Extension NO: 11
2. Line Connection: On for all lines
3. Line Ring On/Off: On
4. Tone/Pulse Mode: Tone
5. Dial Pad On/Off: On
6. Hold Reminder Time: 30 seconds
7. Privacy Release On/Off: On
8. Flash Length: 600 milliseconds
9. Ring Type: Type 1 for all lines
10. Prime Line: Line 1
11. Pause Time: 3 seconds
12. Date/Time: Jan 01 Fri 12:00 AM
23