Cortelco 1 4-Line Multi-User manual Placing a Telephone Call

Placing a Telephone Call

1. Press the button.

NOTE: The first available line will automatically be selected. You may press a line button to dial out from a specific line. Pressing the line button while the telephone is idle will activate the speakerphone.

2. Dial the telephone number you wish to call. The number will appear on the display window.

3. After the conversation has finished, press the	button to
disconnect.

Answering a Telephone Call (CO Line or Intercom)

1. When your station rings from an outside line call or an intercom

	call, press the		button to answer.
2.	After the conversation has finished, press the				button to
	disconnect.
Placing an Intercom Call
1.	Press the	button. The display will show ICM, the			button
	will light, and you will hear intercom tone in the handset.
2.	Dial the extension number you wish to call.
NOTE: After pressing the			button, you may use the first 11 speed
	dial buttons as station select buttons. The buttons are
	preprogrammed as extensions 11 thru 22, from left to right, top to
	bottom.
3.	After the conversation has finished, press the				button to
	disconnect.
Switch from Handset Mode to Speakerphone Mode
1.	While talking on the handset, press the			button.
2.	When the	button lights, place the handset in the cradle.

Switch from Speakerphone Mode to Handset Mode

• While talking on the speakerphone or headset, lift the handset.

The button light will turn off.

Switch Between Headset Mode and Handset Mode

• When headset mode is enabled, Speakerphone Mode is disabled.

• Both Handset and Headset are active simultaneously whenever Headset Mode is enabled.

11