Cortelco 1 4-Line Multi-User manual Wall Mounting

Page 8

Wall Mounting

When wall mounting your telephone, be aware of the following:

• The location where the telephone will be mounted should be away from electrical cables, pipes, or other items which may be punctured when screws are inserted into the wall

• The wall surface should be capable of supporting the telephone weight.

• Use a standard wall phone plate or two screws with anchors.

A Wall Mount Template is provided in the back of this manual for marking the screw locations.

1.Remove the handset from the cradle.

2.Slide the handset catch (below the hook switch) up to remove it from the telephone.

3.Rotate the handset catch a half turn and slide it back into the slot. The handset should now rest on the catch when the telephone is upright for wall mounting.

4.Plug one end of the coil cord into the jack on the back of the phone, and the other end into the handset.

5.Remove the Wall Mounting Adapter by pressing in where indicated in the illustration below.

6.Rotate the Wall Mounting Adapter half way and insert it.

7.Adjust the Viewing Angle Brackets on the left and right side of the telephone to allow the phone to rest flat on the wall.

8.Plug the short telephone cord into the L1/L2 jack on the back of the telephone.

9.Connect the other end of the telephone cord into the jack into the wall telephone outlet.

10.Slip the phone onto the wall mount lining up the wall mounting holes over the wall plate posts or screws. Be sure the short telephone cord is being inserted into the telephone cord channel on the back of the phone.

11.Slide the telephone down so it is firmly in place.

12.Place the handset in the cradle.

13.Plug lines 3 and 4 into the L3/4 jack on the top of the phone.

14.Plug the AC Adapter tip into the ADAPTER jack on the top of the phone. Plug the large end into an AC outlet.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Line Multi-User Capable Telephone System Table of Contents Page Introduction Button Descriptions and FunctionsButton to place Installation Install the BatteriesWhat’s Included With Your 4-Line Speakerphone Site PlanningAdjust the Viewing Angle Desktop ViewingWall Mounting Page Using Your Telephone Speakerphone and Headset when activated OperationLine Use Indications Answering a Telephone Call CO Line or IntercomSwitch from Handset Mode to Speakerphone Mode Switch from Speakerphone Mode to Handset ModeSwitch Between Headset Mode and Handset Mode Placing a Telephone CallArea Codes Features and OperationCaller ID Receiving Caller ID on an Idle Telephone Receiving Caller ID on a Telephone In UseReceiving Multiple Calls Simultaneously Viewing the Caller ID DatabaseDial a Telephone Number from the Caller ID Database Store the Telephone Number in a Speed Dial LocationConference Data JackDo Not Disturb DND Dial Pad DisableDate and Time Headset Mode Headset Enable / DisableExtension Numbers FlashOperation Hold Holding a CallRetrieving a Held Call Predefined Station Select ButtonsAnswering an Intercom Call Line ConnectionManually Turn Off Message Waiting Indicator MWI MuteMessage Waiting / New Call Indication PagingPaging an Individual Extension Answering a Page to an Individual ExtensionAll Extensions Answering an All Page Meet MeAuto Redial Per Call Privacy ReleaseRedial one time only Reset the Phone Ring Type ProgrammingRinger Enable / Disable Ringer Disable/Ringer Enable 1. Press the Program keyPulse to Tone Switching Speed DialTone/Pulse Mode Pulse Mode/Tone ModeVolume Ringer VolumeImportant Safety Instructions Repair Of Your Telephone Do not Include the Original Sales ReceiptFCC Wants You To Know Part 15 of FCC RulesPlace this Template on the Wall Limited Warranty Cortelco Repair Center Sawyer Road Corinth, Mississippi
Top Page Image Contents