Cortelco 1 4-Line Multi-User manual Adjust the Viewing Angle, Desktop Viewing

Page 7

1. Open the battery cover on the back of the telephone by removing the safety screw and pressing the tab in.

2. Insert the batteries as indicated inside the battery compartment.

3. Reinstall the battery cover and replace the safety screw.

NOTE: When the display reads BATT, replace the batteries. When replacing the batteries, disconnect the telephone lines, but keep the power cord attached. Removing power from the telephone may result in memory loss.

Adjust the Viewing Angle

The telephone has 2 desktop viewing angles and a wall mount position. To adjust the angle, remove the brackets from the left and right side of the telephone and reposition as shown below.

Desktop Viewing

 

 

 

 

 

1.

Plug lines 1 and 2 into the L1/L2 jack

 

 

 

 

 

 

on the top of the phone.

 

 

 

 

 

2.

Plug lines 3 and 4 into the

Lines

 

L3/4 jack on the top of the

 

phone.

 

 

 

 

 

 

1 & 2

 

 

 

3.

Plug the AC Adapter tip into

 

 

 

 

 

 

 

 

 

the ADAPTER jack on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

top of the phone. Plug the

 

 

 

 

 

 

 

 

large end into an AC outlet.

 

 

 

 

 

 

 

 

 

 

 

4.

Plug one end of the coil cord into the

 

 

 

 

 

 

jack on the back of the phone, and

 

 

 

 

 

 

the other end into the handset.

 

 

 

 

 

Handset

Coil

Cord

Lines 3 & 4

7

Image 7
Contents Line Multi-User Capable Telephone System Table of Contents Page Button Descriptions and Functions IntroductionButton to place Site Planning InstallationInstall the Batteries What’s Included With Your 4-Line SpeakerphoneDesktop Viewing Adjust the Viewing AngleWall Mounting Page Answering a Telephone Call CO Line or Intercom Using Your TelephoneSpeakerphone and Headset when activated Operation Line Use IndicationsPlacing a Telephone Call Switch from Handset Mode to Speakerphone ModeSwitch from Speakerphone Mode to Handset Mode Switch Between Headset Mode and Handset ModeCaller ID Features and OperationArea Codes Viewing the Caller ID Database Receiving Caller ID on an Idle TelephoneReceiving Caller ID on a Telephone In Use Receiving Multiple Calls SimultaneouslyStore the Telephone Number in a Speed Dial Location Dial a Telephone Number from the Caller ID DatabaseData Jack ConferenceDate and Time Dial Pad DisableDo Not Disturb DND Flash Headset ModeHeadset Enable / Disable Extension NumbersPredefined Station Select Buttons OperationHold Holding a Call Retrieving a Held CallLine Connection Answering an Intercom CallPaging Manually Turn Off Message Waiting Indicator MWIMute Message Waiting / New Call IndicationAnswering an All Page Meet Me Paging an Individual ExtensionAnswering a Page to an Individual Extension All ExtensionsRedial one time only Per Call Privacy ReleaseAuto Redial Ring Type Programming Reset the PhoneSpeed Dial Ringer Enable / DisableRinger Disable/Ringer Enable 1. Press the Program key Pulse to Tone SwitchingRinger Volume Tone/Pulse ModePulse Mode/Tone Mode VolumeImportant Safety Instructions Do not Include the Original Sales Receipt Repair Of Your TelephonePart 15 of FCC Rules FCC Wants You To KnowPlace this Template on the Wall Cortelco Repair Center Sawyer Road Corinth, Mississippi Limited Warranty