Cortelco 1 4-Line Multi-User manual Tone/Pulse Mode, Pulse Mode/Tone Mode, Ringer Volume

Page 25

Press * any time during your call to change to tone dialing mode. The telephone is returned to pulse mode when you disconnect.

Tone/Pulse Mode

Depending on the phone service available in your area, you may need to adjust the dialing mode.

NOTE: All 4 lines will be set to the same dialing mode.

Pulse Mode/Tone Mode

1. Press the PROGRAM key.

2. Press the up or down arrow key to scroll to the “Tone/Pulse” item.

3. Press the right arrow key to select this item.

4. Press the up or down arrow key to select Tone or Pulse dialing.

5. Press the right arrow key to confirm your selection.

Transfer

You may transfer an outside line to any extension on the system.

1. While on a outside line conversation, press

.

2. Dial the extension you wish to transfer to, or press the desired Station Select button (see Intercom - Predefined Station Select Buttons).

NOTE: If the call is transferred successfully, a single confirmation ring will be heard. If the transfer is unsuccessful, a double ring will beeard, and the call will be placed on hold.

Volume

Handset / Headset Volume

While on a conversation using the handset or headset, press the or buttons to adjust the volume.

Ringer Volume
While your telephone is idle, press the	or	buttons to
adjust the ringer volume.
Speakerphone Volume
While on a speakerphone conversation, press the		or

buttons to adjust the speakerphone volume.

25

Image 25

Contents Line Multi-User Capable Telephone System Table of Contents Page Button Descriptions and Functions IntroductionButton to place Install the Batteries InstallationWhat’s Included With Your 4-Line Speakerphone Site PlanningDesktop Viewing Adjust the Viewing AngleWall Mounting Page Speakerphone and Headset when activated Operation Using Your TelephoneLine Use Indications Answering a Telephone Call CO Line or IntercomSwitch from Speakerphone Mode to Handset Mode Switch from Handset Mode to Speakerphone ModeSwitch Between Headset Mode and Handset Mode Placing a Telephone CallCaller ID Features and OperationArea Codes Receiving Caller ID on a Telephone In Use Receiving Caller ID on an Idle TelephoneReceiving Multiple Calls Simultaneously Viewing the Caller ID DatabaseStore the Telephone Number in a Speed Dial Location Dial a Telephone Number from the Caller ID DatabaseData Jack ConferenceDate and Time Dial Pad DisableDo Not Disturb DND Headset Enable / Disable Headset ModeExtension Numbers FlashHold Holding a Call OperationRetrieving a Held Call Predefined Station Select ButtonsLine Connection Answering an Intercom CallMute Manually Turn Off Message Waiting Indicator MWIMessage Waiting / New Call Indication PagingAnswering a Page to an Individual Extension Paging an Individual ExtensionAll Extensions Answering an All Page Meet MeRedial one time only Per Call Privacy ReleaseAuto Redial Ring Type Programming Reset the PhoneRinger Disable/Ringer Enable 1. Press the Program key Ringer Enable / DisablePulse to Tone Switching Speed DialPulse Mode/Tone Mode Tone/Pulse ModeVolume Ringer VolumeImportant Safety Instructions Do not Include the Original Sales Receipt Repair Of Your TelephonePart 15 of FCC Rules FCC Wants You To KnowPlace this Template on the Wall Cortelco Repair Center Sawyer Road Corinth, Mississippi Limited Warranty