before dialing it back. The format button lets you change the format of the displayed number.
Available formats include:
Number of digits | Explanation | Example |
Eleven digits | long distance code “1 ” | |
| +3- digit area code |
|
| telephone number. |
|
Ten digits | ||
| telephone number. |
|
Seven digits |
|
|
|
|
|
NOTE: If the phone company does not supply all ten digits of an incoming number, you will not be allowed to adjust the format of that number.
3.If the number does not dial as shown, press the format/conference button on handset or format/conf on the base. Repeat if necessary, until the correct number of digits show in the display.
4.Press the talk/callback button on the handset or speaker/callback on the base. The number dials automatically.
NOTE: If the number is corrupted, such as a number in a name or an alphabetical character in a number, an error tone sounds from the handset or base and the number cannot be dialed.
DELETING THE CID RECORD SHOWING IN THE DISPLAY
To delete only the record showing in the display:
1. Make sure the phone is OFF (not in talk mode).
NAME
HANDSET 1
38