RCA 25210 manual Pre-dialing, Answering a Call

Telephone Operation

Pre-dialing

1.With the phone idle, manually enter the telephone number. The screen displays the telephone number.

2.Press the DIAL soft key (on base only), Speaker button, Talk button (handset only), or Line 1 or Line 2 button to take a line, and then the telephone number will be dialed out.

Answering a Call

For cordless handset:

1.Press the Talk button to answer the call in receiver mode, -OR-

2.Press the Spk button to answer the call in speakerphone mode, -OR-

3.Press the corresponding LINE soft key to answer the call in receiver mode.

4.When finished, press END button.

For the base:

1.Press the Speaker button to answer the call in speakerphone mode, -OR-

2.Press the corresponding Line button to answer the call in speakerphone mode,

-OR-

3.Press the Headset button to answer the call in headset mode.

4.When finished, press Speaker button (in speakerphone) or Headset button (in headset mode) to end the call.

NOTE: If you have set the Auto Answer as On in the cordless handset, you can answer the call directly by picking up this handset from the base, without pressing any buttons.

NOTE: Adjust the Volume by pressing the VOL (+ or -) button during a call.

Switching Between the Speakerphone, Handset, and Headset Mode

Base

To switch to the speakerphone, press Speaker button. The speakerphone indicator illuminates.

To switch to the headset, press the Headset button to enable the headset, and the headset indicator illuminates.

Cordless Handset

To switch to the speakerphone, press Spk button.

If the headset is plug in, press Talk button to switch to headset.

If the headset is not plug in, press Talk button to switch to cordless handset’s receiver.

21