Display Messages
Display Messages
The following messages show the status of the phone, provides Caller ID information, or helps you set up and use your phone.
DELETE ALL? | Prompt asking if you want to erase all records. |
DELETE? | Prompt asking if you want to erase the current record. |
END/ START | Indicates that it is the end of the list. |
ENTER NAME | Prompt telling you to enter a name. |
ENTER NUMBER | Prompt telling you to enter a telephone number. |
NEW CALLS | Indicates call or calls which have not been reviewed. |
HANDSET NAME | Prompt telling you to enter a user name for the hand |
| set. |
UNAVAILABLE | Indicates that the function you want to initialize |
| cannot work at that moment or the function being |
| worked cannot continue. The system is busy or some |
| other higher priority function is being performed. |
| For example, the message playback function will be |
| stopped when there is an incoming call. |
NO LINE | Indicates that the telephone line is not connected. |
LINE IN USE | Display on handset while the line is in use. |
EMPTY | Indicates there are no CID records in memory. |
OUT OF RANGE | Indicates handset is too far away from the base, and |
| the handset is searching for the base. |
BLOCKED | Indicates the person is calling from a number which is |
| blocked from transmission. |
UNKNOWN | Indicates incoming call is from an area not serviced by |
| CID or the CID information was not sent. |
Handset Sound Signals
Signal | Meaning |
A long warbling tone (with ringer on) | Signals an incoming call |
Two short beeps (several times) | Page signal |
One beep every 14 seconds | Low battery warning |
One long beep after press one key | Confirm |
A short warbling tone (with ringer on) | Error |
|
|
35