2.Press any number other than 0 or an access code (9, for example) if required.
If the dial tone stops, you have
If the dial tone continues, you have pulse service.
Once you know which type of service you have, follow these steps to set the dialing mode.
1. Lift the handset and press MENU/MUTE.
2. Press or to select Dial Mode.
3.Press SEL/CH. The current dialing mode appears.
4. Press | or to select the mode. |
5.Press SEL/CH. The phone beeps.
6.Press END to exit.
SETTING THE HANDSET’S RINGER VOLUME
1.Lift the handset and press MENU/MUTE. The menu appears with Ringer Volume selected.
2.Press SEL/CH.
3. Press or to select Ringer Off, Ringer Low, or Ringer High. Each time you make a selection, the phone rings at the selected volume (or does not ring when you select Off).
4.Press SEL/CH. The phone beeps.
5.Press END to exit.
When you select Ringer Off, the phone does not ring when it receives an incoming call and <Ringer Off> appears on the handset when you make or receive calls, or place it on the base.
Installing Your Telephone
11