Radio Shack 43-3815/43-3898 owner manual Connecting and Charging the Battery Pack

Page 9

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Insert the supplied AC adapter's barrel plug into the DC IN 9V jack on the back of the base.

4.Route the adapter

and modular cords through the grooves on the bottom of the base.

5. Align the base's keyhole slots with the mounting screws and slide the base downward to secure it.

6.Plug the modular cord’s other end into the phone jack, and plug the adapter into a standard AC outlet.

7.Lift the base’s antenna to a vertical position.

CONNECTING AND CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel metal hydride (Ni-MH) battery pack. Before using your phone, you must install the battery pack. Then charge it for about 12–15 hours.

1. Press down and slide off the battery compartment cover.

2. Plug the battery pack’s connector into

the socket in the compartment (the connector ﬁts only one way). Then place the battery pack in the compartment. Handset No.1 appears.

Installing Your Telephone

9

Image 9

Contents 4GHz Multi-Handset Telephone Contents Introduction Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Save These Instructions Battery Safety InstructionsInstalling Your Telephone On a DesktopSelecting a Location On a Wall On a Wall PlateConnecting and Charging the Battery Pack Setting the Dialing Mode Setting the HANDSET’S Ringer Volume Setting the Handset’s Ringer Tone Setting the HANDSET’S Ringer ToneTurning the BASE’S Ringer ON/ OFF To select Ringer TonesTurning Caller ID/CALL Turning Auto Talk ON/OFFSelecting the Language Storing Your Area CodeTo select English , Français Or EspañolTo end a speakerphone call, press Speaker Making and Receiving CallsUsing Mute Adjusting the HANDSET’S VolumeUsing Redial Ringer MuteUsing Flash Using Tone Services on a Pulse LinePaging Using Both the Handset and Speakerphone Switching Between Handset and SpeakerphoneUsing Both Handset Speakerphone Transferring a CallUsing a Headset Using a HeadsetMemory Dialing STORING/EDITING Data in the Phonebook∗ # & space Entering a Pause Press SEL/CH. Distinctive Ring appearsMemory Full Storing a ONE-TOUCH Speed Dial Number Reviewing Names and Numbers in the PhonebookReviewing Names Numbers Phonebook Storing a One-Touch Speed Dial NumberDialing a Number in Memory CHAIN-DIALING Service NumbersTesting Stored Emergency Numbers Using Caller IDTurning Distinctive Ringer ON/OFF Deleting a NumberUsing Caller ID Call Waiting Deluxe ServiceUsing Ask to Hold Answer/Drop 1st appearsConferenced appears Using Conference Caller ID Messages Reviewing Caller ID RecordsADDING/DELETING the Area Code Dialing Numbers from a Caller ID RecordStoring a Caller ID Record in Memory Deleting Caller ID Records Using AN Optional HandsetDeleting a Single Record Deleting ALL RecordsUsing an Optional Handset Charging the Battery PackCaller ID/CALL Waiting Making and Receiving CallsTo select CW Deluxe On or Making and Receiving CallsNEW Message Indicator Using the Menu ButtonAnswering System Operation Setting the Number of Rings Setting the DAY/TIMESetting the Message Alert Setting the Recording TimeSelecting the Message Language Selecting the Outgoing MessageRECORDING/DELETING AN Outgoing Message Setting the System to Answer CallsScreening Calls Setting the System to Answer CallsRecording Incoming Messages Recording Incoming MessagesRecording a Conversation Recording a MemoPlaying Messages Recording a MemoAdjusting the Volume Deleting MessagesDeleting Messages Handset Remote Operation Remote OperationUsing Remote Commands Setting the Security CodePress # then Service and Repair CareFCC Statement FCC Wants YOU to Know Surge Protection InformationProblem Suggestion TroubleshootingRadioShack Corporation