Memory Dialing
3.To enter a name, use the letters on the number keys. Enter the last name first, since files are accessed alphabetically.
For uppercase letters, press the key once for the first letter marked on the key, twice for the second letter, and so on.
For lowercase letters, press four times (or five times) for the first lower case letter marked on the key, five or six times for the second letter, and so on.
For example, to enter John, press 5 once; upper case J appears. Then press 6 six times; lower case o appears. Press 4 five times; lower case h appears. Finally, press 6 five times; lower case n appears.
4.To enter two letters from the same key in a row, press CID/ to move the cursor to the next position.
For example, to enter AB, press 2; A appears. Then press CID/ ; the cursor moves to the next position. Then press 2 twice; B appears.
5. To enter a space, press CID/ twice without entering any characters.
6.To enter a number, repeatedly press the corresponding number key until the number appears.
7.To enter a special character, press 0 repeatedly
to select one of the following characters:
∗ # - & ( ) (space) 0
8.If you make a mistake, press ê/SPEED DIAL/ to move the cursor back to the incorrect entry, press DEL/TRSF to delete the wrong character, and then enter the correct character.
9.Press SEL/CH. Store/Edit No. appears.
10.Enter the number and any tone or pause entries (see “Using Tone Services on a Pulse
20