Radio Shack 43-3815/43-3898 owner manual Handset Remote Operation

HANDSET REMOTE OPERATION

You can check new incoming messages, skip, repeat, or delete your incoming messages from the handset. For example, you can install the answering system in the living room and check your incoming message from a bedroom using the handset. Ô

While the phone is on-hook, press TAD/don the handset. The answering system announces the current time and the number of messages stored in memory. The messages start to play and Remote Playback appears. When the last message has played, the system announces “End of message” and exits the handset remote mode.

If you have new and old messages, the system plays only the new messages. After you have reviewed your new messages, you can play your old messages by pressing TAD/d again.

To replay the current message from the beginning, press f/1. if you press f/1 within about four seconds after a message begins playing, the answering system replays the previous message. If the current message is the first new message, the system plays back from the beginning of the current message (it does not go back into the old message group).

To skip to the next message, press g/3 during playback.

To delete a message, press DEL/4.

REMOTE OPERATION

While you are away from your home or office, you can use a touch-tone or a pulse (rotary) phone with a pocket tone dialer (available at your local RadioShack store) to enter your security code and do any of the following:

Remote Operation

41