RECORDING A MEMO
You can record a message to yourself or others. The system stores memos as incoming messages (see “Playing Messages” on Page 39). Hold down MEMO until the system beeps and announces “Record memo message.” When the tone sounds, speak your message. When you are finished, press MEMO or PLAY/STOP. Ô
RECORDING A CONVERSATION
The system lets you record both sides of a telephone conversation when you are using a handset. Ô
Every state has different regulations governing the recording of conversations over the telephone. Before using this product to record any telephone conversation, check your local, state and federal laws in order to be sure that your use is in compliance with such laws or guidelines.
To start recording a phone conversation, press and hold MEMO on the base until the answering system beeps and - - appears. During recording, the system beeps to indicate the conversation is being recorded.
To stop recording, press PLAY/ STOP or MEMO. The system stores the recorded conversation as a message (see “Playing Messages”).
PLAYING MESSAGES
After the answering system has recorded a message, its message counter shows the total number of messages stored. If you have new messages, the number of new messages flashes.
To play your messages, press PLAY/STOP. The system announces the number of stored messages, and then plays the new messages. The message number appears as each message plays, and the
Ô NOTES Ô
Recording a Memo
•The maximum length for recording a memo is ten minutes.
•The system cannot record a memo less than two seconds long.
•When the TAD's message memory is full,
FL appears and the system announces “No remaining time” when you try to operate it.
Recording a
Conversation
•The maximum length for recording a conversation is ten minutes.
•The system cannot record a conversation less than two seconds long.
•When the system's message memory is full, FL appears.
Answering System Operation
39