TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within one minute.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use.
Press CH/DELETE. Scanning appears on the display, indicating the phone is changing to another channel.
PAGE
To locate the handset (while it’s off the base), press PAGE on the base. The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key, PAGE on the base or the handset is returned to the base. Ô
FLASH AND CALL WAITING
If you have “Call Waiting” service and a call waiting tone sounds while you are on a call, press TALK/ FLASH to accept the waiting call. There is a short pause. Then you will hear the new caller. To return to the original caller, press TALK/FLASH again.Ô
MEMORY DIALING
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key presses. Your phone stores up to ten names/numbers in the handset. Ô
Ô NOTES Ô
Page
Paging is also canceled when the phone receives an incoming call.
Flash and Call Waiting
You must subscribe through your local telephone company to receive Call Waiting Service.
Storing Phone Numbers and Names
In memory dialing operation, you must press a key within 30 seconds. Otherwise, an error tone will sound and the phone will return to standby.
If you return the handset to the base, the phone will also return to standby.
Memory Dialing
13