•Use PAUSE/REDIAL to enter a pause in the dialing sequence. The display shows a P.Ô Each pause counts as one digit and represents a two second delay of time between the digits as they are sent.
•Use CH/DELETE to delete digits as needed.
8.Press MEM or REMOTE/SELECT. You will hear a confirmation tone. Memory storage is complete. For example, if you store a name and
number into memory location number 01, the display shows Memory01 Stored.
After about two seconds, the Select Memory screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9.Press END to return to standby mode.
STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next, and finally the number corresponding to the key.
Ô NOTE Ô
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
Memory Dialing
15