4.Press 
VOL to move the pointer to Yes.
5.Press REMOTE/SELECT or CH/DELETE.
6.You hear a confirmation tone. After about two seconds, the handset returns to standby mode.
CALLER ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, and time. Additionally, you can dial the displayed number and store the information for memory dialing. Make sure you have turned on the Caller ID on Call Waiting feature. (See “Changing the Auto Talk and CIDCW” on page 9.)
WHEN THE TELEPHONE RINGS
1.When the Caller ID message is received, the display shows the caller’s phone number along with the date and time. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s name,
the caller’s name appears on the display (up to 15 letters).Ô
You may receive any one of the following messages:
Message | Display |
|
|
When invalid data is | “Incomplete Data” |
received |
|
|
|
When a private name | “Private Name” |
is received |
|
|
|
Ô NOTES Ô
•If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear.
•When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name do not appear.
(This includes international calls.)
•When the call is via a private branch exchange (PBX), the caller’s phone number and name may not appear.
•Data errors appear as “ ”.
Caller ID
21