1.Press MENU/CLOCK three times in standby mode.
You hear “Ring time” and the current ring time ([ 
] two, [ 
] four, [ 
] six, [
] Toll saver), and it is displayed on the base. Then you hear the guidance for setting the ring time.
2.Press 
/VOL/SEL or 
/VOL/SEL until the desired ring time appears.
3.Press SET to select the new ring time. You hear a confirmation tone. Then the announcement “Ring time” and the new ring time is announced. After a few seconds, the system announces “To set record time, press menu again”.
Selecting the Message Record Time
You have three record time options. The options “one minute” or “four minutes” set the duration for recording the incoming messages. “Announce only” answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message.
1.Press MENU/CLOCK four times in standby mode.
You hear “Record time” and the current recording time ([ 
] one minute, [ 
] four minutes, [ 
] Announce only, No recording), and it is displayed on the base. Then you hear the guidance for setting the record time.
2.Press 
/VOL/SEL or 
/VOL/SEL until the desired time appears.
3.Press SET to select the new recording time. You hear a confirmation tone. Then the announcement “Record time” and new recording time is announced. After a few seconds, the system announces “To set message alert, press menu again”.
The Integrated Answering Device
29