SETTING MENU OPTIONS
There are five setup options: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the TALK/FLASH button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press TALK/FLASH to answer the call.
Changing the Auto Talk and CIDCW
1.Press and hold CID/MENU.
2.Use VOL or VOL to move the pointer to the selection that you would like to change.
Press REMOTE/SELECT to toggle between On and Off.
3.Press END and return the handset to the base unit to complete the setting. The handset returns to the standby mode.
Entering your Area Code
If you enter a
When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full
1.When the phone is in the standby mode, press and hold CID/MENU.
2.Press VOL twice to select Area Code.
3.Press REMOTE/SELECT.
Installation
9