Memory Dialing
The screen appears with the memory location number that you have selected in the display.
3.Press MEM or REMOTE/SELECT.
4.Press 
VOL or 
VOL to select Edit MemoryXX. Then press MEM or REMOTE/ SELECT.
Store Name is displayed. The cursor flashes indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line.
5.Use the number keys, 
/TONE/<, #/>, or CH/ DELETE to edit the name. (See “Storing Phone Numbers and Names” on page 13.) To edit only the phone number, skip this step.
6.Press MEM or REMOTE/SELECT.
The cursor flashes indicating that the display is ready for the number to be edited.
7.Use the number keys, 
/TONE/<, #/>, PAUSE/ REDIAL or CH/DELETE to edit the phone number.
The phone number cannot exceed 20 digits.
If you don’t want to change the phone number, skip this step.
8.Press MEM or REMOTE/SELECT. If you changed either name or phone number, a confirmation
display shows up. If it is correct, press 
VOL to select Yes and press REMOTE/SELECT. You hear a confirmation tone. The memory storage is complete.
For example, if you store a name and number
into memory location number 01, the display shows Memory01 Stored. After about two seconds, Select Memory screen is displayed.
9.Press END to return to standby mode.
18