ADJUSTING THE
HANDSET VOLUME
To adjust the volume you hear through the handset during a call, press 
to in-
crease or 
to decrease the volume. The display shows Volume Maximum, Volume High, Volume Medium, or Volume Low.
Note: When you press 
while the vol- ume is maximum or 
while the volume is low, the setting does not change.
SELECTING THE
CHANNEL
The phone scans 30 channels (frequen- cy pairs used between the base and the handset) and automatically selects a clear channel each time you make or re- ceive a call. If you hear other conversa- tions or excessive noise during a call, press DEL/CH to select a different chan- nel. The display shows Scanning.
Note: If the handset is too far from the base, the channel might not change. Move closer to the base and try again.
USING MUTE
To talk to someone in the room while us- ing the speakerphone without the per- son on the other end of the phone line hearing your conversation, press MUTE. The SPKR/MUTE indicator flashes.
MUTE
Press MUTE again to resume your phone conversation.
SWITCHING BETWEEN THE HANDSET AND SPEAKERPHONE
To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation on the speakerphone, press TALK on the handset.
To switch to the handset while you are using the speakerphone, lift the handset off the base. If the handset is away from the base, press TALK, then press
SPEAKER.
USING BOTH THE
HANDSET AND
SPEAKERPHONE
If someone else is using the speaker- phone, press TALK on the handset to join the conversation. If someone else is using the handset, press SPEAKER on the base to join the conversation.
17