Radio Shack TAD-729 owner manual Read this Before Installation, FCC Statement

Page 5

READ THIS BEFORE INSTALLATION

We have designed your phone to con- form to federal regulations, and you can connect it to most telephone lines. How- ever, each device that you connect to the phone line draws power from the phone line. We refer to this power draw as the device’s ringer equivalence num- ber, or REN. The REN is on the bottom of the base. If you are using more than one phone or other device on the line, add up all the RENs. If the total is more than five (three in rural areas), your phones might not ring. If ringer operation is impaired, remove a device from the line.

FCC STATEMENT

Your TAD-729 complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your phone company. These numbers are on the bottom of the base.

You must not connect your phone to any of the following:

coin-operated systems

party-line systems

most electronic key phone systems

Note: Your telephone operates on stan- dard radio frequencies, as allocated by the FCC. Even though the security ac- cess-protection code prevents unautho- rized use of your phone line, it is possible for other radio units operating on similar frequencies within a certain area to unintentionally intercept your conversations and/or cause interfer- ence. This lack of privacy can occur with any cordless phone.

5

Image 5
Contents TAD-729 Features Telephone Features Important Caller ID Information TAD FeaturesFCC Statement Read this Before InstallationContents Using the Toll-Saver Using Remote Commands On a Desk Top PreparationMounting the Phone On a Wall Plate or Wall Connecting and Charging the Battery Pack Setting the Dialing Mode Turning the BASE’S Ringer OFF and on Setting the Ringer TONE/VOLUMESetting the DAY/TIME Setting the Number of RingsStoring Your Area Code Setting Auto TalkTurning Call WAITING/ Caller ID ON/OFF Page Using the Speakerphone Using the HandsetTelephone Operation Making and Receiving a CallUsing Mute Adjusting Handset VolumeSwitching Between the Handset and Speakerphone Using Both Handset SpeakerphoneUsing Redial Using FlashTransferring a Call Between the Handset and Base Using PAGE/INTERCOMUsing a Headset Handset Memory DialingStoring a Name and Number in Memory Base Reviewing Memory Numbers Handset only Editing or Deleting a Number in the HANDSET’S MemoryEntering a Pause Dialing a Memory Number CHAIN-DIALING Service NumbersTesting Stored Emergency Numbers Caller ID Messages Caller ID Operation Handset onlyReviewing Caller ID Records Deleting Caller ID Records Storing a Caller ID Record to MemoryPage RECORDING/DELETING AN Outgoing Message Setting the Record TimeTAD Operation Screening Calls Setting the TAD to Answer CallsRecording Incoming Messages Recording a MemoPlaying Messages Recording a ConversationDeleting Messages Adjusting the TAD’S VolumeRemote Operation Using the TOLL-SAVERUsing Remote Commands Press # then Problem Suggestion TroubleshootingProblem Suggestion Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowPage RadioShack Corporation