TAD OPERATION
SELECTING THE OUTGOING MESSAGE
The TAD has two prerecorded outgoing messages. One asks the caller to leave a message: “Hello, no one is available to take your call. Please leave a message after the tone.” The TAD uses this mes- sage when REC TIME is set to 1 or 4 (see “Setting the Record Time”). The other is simply an announcement and does not let the caller leave a message: “Hello, no one is available to take your call.” The TAD uses this message when REC TIME is set to ANN (announcement only).
OGM
REC TIME
You can also record your own message (see “Recording/Deleting an Outgoing Message”). When you record your own outgoing message, the TAD uses it for all REC TIME settings.
To switch between your outgoing mes- sage and the TAD’s prerecorded mes- sage, press OGM. When the current message begins to play, press OGM again. The TAD switches to the other message and plays it.
RECORDING/DELETING AN OUTGOING MESSAGE
To record your outgoing message (up to 30 seconds long), hold down OGM until the TAD beeps and
To delete your outgoing message and use the TAD’s prerecorded messages, hold down OGM until the TAD beeps. Then press OGM again within two sec- onds.
SETTING THE RECORD TIME
Set REC TIME to 1, 4, or ANN to deter- mine how the
1 — The TAD plays the outgoing mes- sage and lets callers leave a message up to 1 minute long.
4 — The TAD plays the outgoing mes- sage and lets callers leave a message up to 4 minutes long.
ANN (announcement only) — The TAD plays the outgoing message but does not let callers leave a message.
28