If you make a mistake, move the cursor over the error, then enter the correct character, or press DEL/CH to delete a character. To delete all the characters, hold down DEL/CH for at least 1 second.
6.Press SELECT. Store Number appears.
7.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 18 and “Entering a Pause” on Page 23).
8.Press SELECT. The phone beeps and Memory n Stored appears. After 2 seconds, Memory Store appears. Repeat Steps
9.When you finish, press MEM to exit Memory Store.
Use the supplied memory directory sticker to record your stored numbers. Peel the backing from the sticker and at- tach it to the base.
To replace a stored number, store a new one in its place.
In the Base
1.Press MEMORY. The CHARGE/IN USE indicator blinks.
MEMORY
2.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 18 and “Entering a Pause” on Page 23).
3.Press MEMORY again, then enter the memory location number
To clear a stored number, simply store a new number in its place. Or, press MEM- ORY twice. Then press the memory lo- cation number
Use the supplied memory directory sticker to record your stored numbers. Peel the backing from the sticker and at- tach it to the base.
22