Radio Shack TAD-729 owner manual Setting Auto Talk, Turning Call WAITING/ Caller ID ON/OFF

Page 14

SETTING AUTO TALK

Your phone is preset so you must press TALK to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base, or, if the handset is away from the base, by pressing any key.

Follow these steps to turn auto talk on or off.

1.Lift the handset and hold down

CALL ID until Caller ID Setup appears on the display with Auto Talk selected.

CALL ID

SELECT

2.Press SELECT to change the auto talk setting. On or Off appears indi- cating the selected setting.

3.To clear the display when you finish, press CALL ID or return the handset to the base.

TURNING CALL WAITING/ CALLER ID ON/OFF

If you have Call Waiting with Caller ID service, you can set the TAD-729 to show Caller ID information for an incom- ing call even while you are already on the phone.

Follow these steps to turn the Caller ID/ Call Waiting feature on or off.

1.Lift the handset and hold down

CALL ID until Caller ID Setup appears on the display with Auto Talk selected.

2.Press 2 or to select CIDCW (Caller ID/Call Waiting).

3.Press SELECT to change the Caller ID/Call Waiting setting. On or Off appears indicating the selected set- ting.

4.Press CALL ID then return the hand- set to the base to store the new set- ting.

STORING YOUR AREA CODE

To quickly dial a number from a Caller ID record (see “Dialing Numbers from a Caller ID Record” on Page 26) or to cor- rectly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to Memory” on Page 26), you must store your local area code in the TAD-729’s memory. Then, when you dial from a Caller ID record, the TAD-729 skips the area code if it matches the one you stored.

Follow these steps to store your area code.

1.Lift the handset and hold down

CALL ID until Caller ID Setup appears on the display with Auto Talk selected.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TAD-729 Features Telephone Features TAD Features Important Caller ID InformationRead this Before Installation FCC StatementContents Using the Toll-Saver Using Remote Commands On a Desk Top PreparationMounting the Phone On a Wall Plate or Wall Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the Ringer TONE/VOLUME Turning the BASE’S Ringer OFF and onSetting the Number of Rings Setting the DAY/TIMEStoring Your Area Code Setting Auto TalkTurning Call WAITING/ Caller ID ON/OFF Page Telephone Operation Using the HandsetUsing the Speakerphone Making and Receiving a CallSwitching Between the Handset and Speakerphone Adjusting Handset VolumeUsing Mute Using Both Handset SpeakerphoneUsing Flash Using RedialUsing PAGE/INTERCOM Transferring a Call Between the Handset and BaseUsing a Headset Handset Memory DialingStoring a Name and Number in Memory Base Reviewing Memory Numbers Handset only Editing or Deleting a Number in the HANDSET’S MemoryEntering a Pause Dialing a Memory Number CHAIN-DIALING Service NumbersTesting Stored Emergency Numbers Caller ID Messages Caller ID Operation Handset onlyReviewing Caller ID Records Storing a Caller ID Record to Memory Deleting Caller ID RecordsPage RECORDING/DELETING AN Outgoing Message Setting the Record TimeTAD Operation Recording Incoming Messages Setting the TAD to Answer CallsScreening Calls Recording a MemoRecording a Conversation Playing MessagesAdjusting the TAD’S Volume Deleting MessagesRemote Operation Using the TOLL-SAVERUsing Remote Commands Press # then Troubleshooting Problem SuggestionProblem Suggestion Care and Maintenance Replacing Battery Pack FCC Wants YOU to Know LightningPage RadioShack Corporation
Top Page Image Contents