Radio Shack TAD-729 owner manual On a Wall Plate or Wall

Page 9

On a Wall Plate or Wall

1.Insert the two tabs at the top of the narrow end of the supplied bracket into the base’s upper tab slots as shown, then press down on the bracket’s latches and insert them into the lower slots.

2.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base as in Step 1 of “On a Desk Top” on Page 8.

3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack as in Step 3 of “On a Desk Top” on Page 8.

4.Route the adapter and modular cords through the grooves on the bracket.

5.Plug the modular cord’s other end into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it.

6.Plug the adapter into a standard AC outlet.

7.Press and lift out the handset holder, flip it over as shown, then snap it back into place so it holds the handset.

Handset Holder

8.Lift the base’s antenna to a vertical position.

9

Image 9

Contents TAD-729 Features Telephone Features Important Caller ID Information TAD FeaturesFCC Statement Read this Before InstallationContents Using the Toll-Saver Using Remote Commands Preparation Mounting the PhoneOn a Desk Top On a Wall Plate or Wall Connecting and Charging the Battery Pack Setting the Dialing Mode Turning the BASE’S Ringer OFF and on Setting the Ringer TONE/VOLUMESetting the DAY/TIME Setting the Number of RingsSetting Auto Talk Turning Call WAITING/ Caller ID ON/OFFStoring Your Area Code Page Using the Speakerphone Using the HandsetTelephone Operation Making and Receiving a CallUsing Mute Adjusting Handset VolumeSwitching Between the Handset and Speakerphone Using Both Handset SpeakerphoneUsing Redial Using FlashTransferring a Call Between the Handset and Base Using PAGE/INTERCOMUsing a Headset Memory Dialing Storing a Name and Number in MemoryHandset Base Editing or Deleting a Number in the HANDSET’S Memory Entering a PauseReviewing Memory Numbers Handset only CHAIN-DIALING Service Numbers Testing Stored Emergency NumbersDialing a Memory Number Caller ID Operation Handset only Reviewing Caller ID RecordsCaller ID Messages Deleting Caller ID Records Storing a Caller ID Record to MemoryPage Setting the Record Time TAD OperationRECORDING/DELETING AN Outgoing Message Screening Calls Setting the TAD to Answer CallsRecording Incoming Messages Recording a MemoPlaying Messages Recording a ConversationDeleting Messages Adjusting the TAD’S VolumeUsing the TOLL-SAVER Using Remote CommandsRemote Operation Press # then Problem Suggestion TroubleshootingProblem Suggestion Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowPage RadioShack Corporation