Radio Shack 4-Line Telephone System with Speakerphone and Caller ID owner manual On a Wall Plate

Page 11

43-5709.fm Page 11 Wednesday, December 20, 2000 10:56 AM

plug the other end of the cord into a two- line phone jack or a coupler that is con- nected to two single-line phone jacks.

4.Plug the other long cord into LINE 3&4 on the bottom of the telephone. Use a coin or screwdriver to fit the cord into the other groove beside the line jacks and plug the other end into the other two-line jack or coupler.

5.Leave the bracket detached and con- nect the AC adapter (see “Connecting the AC Adapter” on Page 12) and install the backup batteries (see “Installing the Backup Batteries”).

6.Attach the bracket with the narrow end of the wedge pointing down and slide the bracket up to lock it in place.

On a Wall Plate

1.Follow Steps 1–5 of “On a Desk.”

2.With the narrow end of the mounting bracket facing up, insert the bracket into the bottom mounting slots. Push the bracket up to lock it into place.

inches apart. Thread two screws into the wall, letting the heads extend about 1/8 inch.

1.Follow Steps 1–5 of “On a Desk.”

2.With the narrow end of the mounting bracket facing up, insert the bracket into the bottom mounting slots. Push the bracket up to lock it into place.

3.Align the bracket’s keyhole slots with the screws, then slide the base downward to secure it.

3.Align the bracket’s keyhole slots with the wall plate studs, then slide the base downward to secure it.

On a Wall

To mount the telephone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base. Drill two holes 315/16

INSTALLING THE BACKUP BATTERIES

Your system requires four AA batteries (not supplied) to provide backup power for a few hours if AC power fails. The backup batteries do not power all the system's features. For the best performance and longest life, we recommend RadioShack alkaline batteries.

If the power fails but the backup batteries are installed and have power, all data and sys- tem information is retained and network com- munication is restored.

Installation

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Line Telephone System FCC Wants YOU to Know Read this Before InstallationImportant Information FCC StatementLightning Important Safety InstructionsFm Page 4 Wednesday, December 20, 2000 1056 AM Contents Memory Operation Features Quick Look at Your Phone System Communication InstallationUsing the System with the SP708 System Planning Your SystemOn a Desk Square ConfigurationNon-Square Configuration/ Private Line Support Mounting the SystemOn a Wall Installing the Backup BatteriesOn a Wall Plate Battery Power Levels Connecting the AC AdapterPreparation Setting UP the StationsVerifying Station and Line Configurations Setting the Ringer Volume Verifying System ConfigurationStation Reset Setting the RingerTelephone Operation Setting the HANDSET, HEADSET, and Speaker VolumeUsing a Headset Making a Conference Call Switching Between the Headset and SpeakerphoneMaking Calls Selecting a LineWithout Announcement Answering CallsTransferring Calls Answering a Call While You Are On Another LineUsing Mute Using Auto RedialUsing Flash Using HoldPaging All Stations Using Automatic AnswerMonitoring Other Rooms Using Auto AttendantUsing Standard Phones with the System Setting Private LinesEntering a Pause Memory OperationStoring a Name and Number in Memory Editing Stored Numbers Chain-Dialing Service NumbersTesting Stored Emergency Numbers Dialing a Stored NumberProgramming Caller ID Caller ID OperationCaller ID Messages Reviewing Caller ID RecordsDialing Numbers from a Caller ID Record Deleting Records Storing a Caller ID Record in MemoryProblem Solution TroubleshootingCare Performing a System UpdateResetting the Time and Date Limited One-Year Warranty
Top Page Image Contents