Futrex 5000A/WL, 5000/XL, 5000A/ZL To Measure Another Site or Repeat a Measurement, OFF Message

Page 21

NOTE - IT IS IMPORTANT TO:

!Aim the silver stripe of the Light Wand vertically toward the upper portion of the body.

!Keep the body site to be measured relaxed (do not permit subject to flex muscle area being measured).

!Use the Light Shield to block the external light. ALWAYS avoid measurements under strong lights (e.g. direct sunlight) because errors may occur.

!Press ENTER.

The display will then show a decimal point following the number "1". The number "2" will then be displayed.

CAUTION: Do not move the Light Wand while the decimal point is illuminated. The actual measurement is being made at that time.

!

Remove the Light Wand and replace it on the same site on the body.

!Press ENTER.

The display will show a decimal point following the number "2".

6)The Relative Body Fat Reading is Displayed

NOTE: This relative body fat is not a direct "Percentage" reading. This value, however, can be used as a guide to monitor changes in fat distribution within the location measured.

To Measure Another Site or Repeat a Measurement

Place the Light Wand firmly on the particular body site and follow steps outlined in 6 and 7.

OFF Message

An OFF Message will appear and the FUTREX-5000A/WL Automatic Power Down feature will turn the unit OFF if the user has not pressed any key for 6 minutes. To use the unit again, turn the Power Switch OFF and then ON again.

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents FUTREX-5000A/WL Body FAT and Fitness Computer Table of Contents Main Body Optical Standard Appearance and Part NamesLight Wand Printer Paper Installation Battery InstallationPreparation C AdapterPage FUTREX-5000/XL Models of the Futrex Body FAT and Fitness ComputerFUTREX-5000A/ZL FUTREX-5000A/WLTo Estimate Percent Body FAT Percent Body FAT MeasurementPage Page Page Standards Frequency Time Off Message To Repeat a MeasurementSelecting the Biceps Measuring Site Selecting the Triceps Measuring Site Selecting the Thigh Measurement Site During countdown press CLEAR, Select PROGRAM, Risks Adjusting the Percent Body FAT ReadingEstimating Relative FAT Distribution To Measure Another Site or Repeat a Measurement Self Measurement of Percent Body FAT Setting the Correct Date Page Fitness Analysis Printout ProgramsTo Obtain a Fitness Analysis Printout Press the Select Program KeyTo Print Another Fitness Analysis follow steps 3 through EnterTo Obtain an Update Analysis Printout Update AnalysisTo Print Another Update Analysis follow steps 3 through Color Printer Function ModeF1 Selection of English or Metric Units To Enter into the Function ModeF3 Use of Dotson-Davis Equations F2 Selection Calorie Limit ModeF4 Color Printer Selection Troubleshooting Problem Probable Cause Corrective Measures Page Problem Probable Cause Corrective Measures Problem Probable Cause Corrective Measures Measurement Technique General SpecificationsKey Name Keypad Description
Top Page Image Contents